ASTM A312 TP316H Pickled And Annealed Seamless Pipe
Shape:round
Technique:Cold Rolled
Surface Treatment:Sanded /Mirror/Hairline Brushed
Thickness:0.3-30mm
out Diameter:8-219mm
Length:5.8/6m or Custom
Stock:in Stock
Sample:Available
Transport Package:Standard Sea-Worthy Packing
ASTM A312 TP316H Pickled And Annealed Seamless Pipe Suppliers
GNEE is an ISO-certified exporter of ASTM A312 pipes and a professional manufacturer and supplier of ASTM A312 TP 316H stainless steel pipes, specially suitable for power generation (boilers and superheaters), chemical, oil & gas, and marine engineering applications.
The ASTM TP 316H stainless steel round pipes we supply have a higher carbon content than standard 316 stainless steel. It is a high-carbon austenitic stainless steel pipe, available in both seamless and welded forms. ASTM A312 TP 316H seamless stainless steel pipes exhibit excellent toughness even at extremely low temperatures and are widely used in the pressure vessel industry. The melting point of AISI 316H welded pipes is approximately 1400 °C, specifically designed for high-temperature service conditions.
The outer diameter of ASTM A312 TP 316H seamless stainless steel pipes ranges from 3.2 mm to 800 mm, with a wall thickness range of 0.25 mm to 50 mm. Each batch of products undergoes strict quality inspections, including chemical composition analysis, tensile testing, and non-destructive testing (NDT), and is supplied with a complete factory test certificate (MTC) according to EN 10204 3.1 standards.

What is the difference between 316 and 316H?
316H is the high-carbon version of 316 stainless steel. 316L has a maximum carbon content of 0.03%, while 316H has a maximum carbon content of 0.04%. The higher carbon content of 316H makes it more resistant to intergranular corrosion, while the lower carbon content of 316L makes it more weldable.
Specification
Chemical Composition of ASTM A312 TP316H SS Pipe
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
| 316H | Min | 0.04 | 0.04 | 0 | - | - | 16.0 | 2.00 | 10.0 | - |
| max | 0.10 | 0.10 | 0.75 | 0.045 | 0.03 | 18.0 | 3.00 | 14.0 | - |
Mechanical Properties of ASTM A312 TP316H SS Pipes
| Grade | Tensile Str (MPa) min |
Yield Str 0.2% Proof (MPa) min |
Elong (% in 50mm) min |
Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 316H | 515 | 205 | 40 | 95 | 217 |
Physical properties of TP316H SS Pipe in the Annealed Condition
| Grade | Density (kg/m3) |
Elastic Modulus (GPa) |
Mean Co-eff of Thermal Expansion (µm/m/°C) | Thermal Conductivity (W/m.K) |
Specific Heat 0-100°C (J/kg.K) |
Elec Resistivity (nΩ.m) |
|||
| 0-100°C | 0-315°C | 0-538°C | At 100°C | At 500°C | |||||
| 316/L/H | 8000 | 193 | 15.9 | 16.2 | 17.5 | 16.3 | 21.5 | 500 | 740 |
Apllications
1. Food preparation equipment particularly in chloride environments
2. Laboratory benches & equipment
3. Coastal architectural panelling, railings & trim
4. Boat fittings
5. Chemical containers, including for transport
6. Heat Exchangers
7. Woven or welded screens for mining, quarrying & water filtration
What are the grain size and testing requirements?
TP316H requires a minimum grain size of ASTM No. 7 or coarser (mandatory for the "H" grade to ensure creep resistance). Standard tests include hydrostatic pressure test, tensile test (ASTM E8), and hardness verification. Optional: intergranular corrosion (IGC) test, impact test.
If you have project requirements for ASTM A312 TP316H stainless steel seamless pipes, please click the button below to contact us immediately. We would be happy to assist you.
inspection
Each batch of steel pipes undergoes chemical composition analysis (PMI/spectroscopic testing) with strict control over Cr (16.0–18.0%), Ni (10.0–14.0%), Mo (2.0–3.0%), and C (0.04–0.10%). Additionally, the pipes are subjected to tensile testing (ASTM A370), hardness testing, dimensional tolerance checks, surface inspections, intergranular corrosion testing (ASTM A262, if required), and hydrostatic testing or non-destructive testing (UT or ET). An EN 10204 3.1 MTC is available for every pipe, detailing the heat number, chemical composition, mechanical properties, and test records to ensure full quality traceability.


AISI 316H Tube supplier
GNEE is equipped with cold-drawing lines, automatic welding equipment, solution annealing furnaces, pickling lines, straightening machines, and eddy current/ultrasonic testing systems. Precision cold-drawing processes are employed to control dimensional tolerances, while in-line testing ensures product consistency. Lead times are approximately 7–15 working days for standard stock sizes and 20–30 working days for custom sizes or products with special requirements. Production complies with standards such as ASTM A312 and A213, and shipments include EN 10204 3.1 MTCs along with comprehensive quality documentation.


Packaging and Marking
Packaging shall be in bundles or laminated wooden crates, wrapped in plastic, and appropriate protective measures shall be taken to ensure seaworthiness for transport or as required.
Marking shall comply with the provisions of A1016/A1016M specifications and shall include whether the pipes are hot-worked or cold-worked, including but not limited to: standard, grade, size, furnace number, and batch number.


Hot Tags: astm a312 tp316h pickled and annealed seamless pipe, China astm a312 tp316h pickled and annealed seamless pipe manufacturers, suppliers, factory, ASTM A213 TP321H Seamless Stainless Steel Pipe, ASTM A312 TP316 Stainless Steel Round Pipe, ASTM A312 Stainless Steel Pipe, 316 316L Marine Grade Stainless Steel Pipe, seamless stainless steel pipe for conventional industrial work, Polished 316 Stainless Steel Tubing
You Might Also Like
Send Inquiry









