410S 420J2 430 Hot-Rolled Stainless Steel Coils Price
Jun 23, 2026
Leave a message
Many buyers assume that the prices of all stainless steel coils should be roughly the same. However, in today's market, price differences among 410S, 420J2, and 430 hot-rolled stainless steel coils can range from $400 to $800 per ton, depending on factors such as alloy composition, hardness requirements, rolling processes, and downstream application needs.
For instance, kitchenware manufacturers might select 430 stainless steel for its excellent formability and lower cost, whereas cutlery manufacturers might opt for 420J2 due to its superior hardness and wear resistance. Choosing the wrong grade can not only increase material costs and reduce production efficiency but may even lead to premature product failure.
Given the volatility of raw material prices and shifting global manufacturing demands, it is essential for purchasing managers, distributors, and industrial manufacturers to gain a thorough understanding of the cost structures associated with 410S, 420J2, and 430 stainless steel coils.
410S vs 420J2 vs 430 Hot Rolled Stainless Steel Coil Prices
| Product | Size (mm) | Grade (China) | Grade (INT) |
Price($/ton) | Trend($) | Remark |
| 400 Series HR SS Coil | 4.0*1520*C | 430/NO.1 | 430/NO.1 | 1017.75 | 0.00 | Mill Edge |
| 400 Series HR SS Coil | 6.0*1520*C | 430/NO.1 | 430/NO.1 | 1017.75 | 0.00 | Mill Edge |
| 400 Series HR SS Coil | 3.0*1520*C | 430/NO.1 | 430/NO.1 | 1017.75 | 0.00 | Mill Edge |
| 400 Series HR SS Coil | 4.0*1520*C | 410S/NO.1 | 410S/NO.1 | 1017.75 | 0.00 | Mill Edge |
| 400 Series HR SS Coil | 3.0*1520*C | 410S/NO.1 | 410S/NO.1 | 1017.75 | 0.00 | Mill Edge |
| 400 Series HR SS Coil | 6.0*1520*C | 410S/NO.1 | 410S/NO.1 | 1017.75 | 0.00 | Mill Edge |
| 400 Series HR SS Coil | 4.0*1520*C | 410/NO.1 | 410/NO.1 | 1047.25 | 0.00 | Mill Edge |
| 400 Series HR SS Coil | 3.0*1520*C | 410/NO.1 | 410/NO.1 | 1047.25 | 0.00 | Mill Edge |
| 400 Series HR SS Coil | 6.0*1520*C | 410/NO.1 | 410/NO.1 | 1032.50 | 0.00 | Mill Edge |
| 400 Series HR SS Coil | 3.0*1520*C | 420J1/NO.1 | 420J1/NO.1 | 1032.50 | 0.00 | Mill Edge |
| 400 Series HR SS Coil | 4.0*1520*C | 420J1/NO.1 | 420J1/NO.1 | 1032.50 | 0.00 | Mill Edge |
| 400 Series HR SS Coil | 4.0*1520*C | 420J2/NO.1 | 420J2/NO.1 | 1062.00 | 0.00 | Mill Edge |
| 400 Series HR SS Coil | 6.0*1520*C | 420J1/NO.1 | 420J1/NO.1 | 1032.50 | 0.00 | Mill Edge |
| 400 Series HR SS Coil | 6.0*1520*C | 420J2/NO.1 | 420J2/NO.1 | 1062.00 | 0.00 | Mill Edge |
| 400 Series HR SS Coil | 3.0*1520*C | 420J2/NO.1 | 420J2/NO.1 | 1062.00 | 0.00 | Mill Edge |
Notes:
1. The prices listed above are tax-inclusive ex-works prices; a small pickup fee applies upon collection, and shipping costs are not included.
2. Product weights in the table are subject to the actual weighed values at the time of the transaction.
3. 4-foot Mill Edge: 1235–1250 mm; 5-foot Mill Edge: 1520–1530 mm; 4-foot Slit Edge: 1219 mm; 5-foot Slit Edge: 1500 mm. The price difference between slit edge and mill edge products ranges from $20 to $30.
5. To inquire about prices for 400-series hot-rolled stainless steel coils/sheets in other specifications, materials, or brands, or to request FOB/CIF quotes for the products listed, please submit an inquiry form, and our customer service team will provide a personal response.
410S, 420J2, and 430: Which grade is the cheapest?
Among these three grades, 410S typically has the lowest cost, followed by 430, while 420J2 generally commands the highest price. Typical FOB price ranges for Chinese-produced hot-rolled coils are as follows: $1,300–$1,650/tonne for 410S, $1,450–$1,850/tonne for 430, and $1,800–$2,400/tonne for 420J2.
Why is the price of 420J2 higher than that of 430?
Although both grades belong to the 400 series of stainless steels, 420J2 has a significantly higher carbon content (typically 0.26%–0.40%), whereas 430 contains 0.12% or less. This higher carbon content allows 420J2 to achieve a hardness of 48–55 HRC after heat treatment; in contrast, 430 typically has a hardness below 20 HRC and cannot be hardened by quenching. Consequently, the price of 420J2 steel coils is generally 15%–35% higher than that of 430 coils, particularly when used for manufacturing cutlery, blades, surgical instruments, and wear-resistant components.
410S, 420J2, and 430: Which offers better wear resistance?
420J2 provides the best wear resistance by a substantial margin. After proper heat treatment, its hardness can reach 48–55 HRC, making it suitable for cutting tools, scissors, knives, and industrial wear parts. By comparison, 410S and 430 typically exhibit hardness values below 95 HRB (approximately 18–20 HRC equivalent) in the annealed condition. Wear testing in tooling applications often shows that hardened 420J2 components can achieve two to four times the service life of equivalent 430 components under abrasive conditions. Therefore, when resistance to scratching, cutting-edge wear, or mechanical abrasion is the primary concern, 420J2 is usually the preferred choice.
410S, 420J2, and 430: Which is more suitable for stamping?
Type 430 stainless steel is generally the optimal choice for deep-drawing and stamping applications. With a chromium content of approximately 16%–18%, it offers good ductility and consistent forming performance, making it widely used in the manufacture of kitchen sinks, cookware, washing machine drums, appliance panels, and decorative components. In contrast, Type 420J2-due to its higher carbon content and lower ductility-carries a higher risk of cracking during intensive forming operations. While Type 410S outperforms Type 420J2, its stamping performance generally still falls short of Type 430. In large-scale appliance manufacturing, the use of Type 430 stainless steel can often reduce the stamping scrap rate by 10%–20% compared to high-carbon alternatives.
Send Inquiry