ASTM A269 TP316LN Stainless Steel Tubes
Shape:Round
Technique:Cold Rolled
Material:Stainless Steel
Thickness:0.5mm-40mm
Diameter:6mm-630mm; 10mm-2000mm.
Length:6000mm, Customize.
What is ASTM A269 TP316LN Steel Pipe?
ASTM A269 is the standard specification for general-purpose seamless austenitic stainless steel tubing. TP316LN is a low-carbon, nitrogen-enhanced variant of 316 stainless steel. Its low carbon content minimizes the precipitation of chromium carbides during welding, while the addition of nitrogen increases the material's mechanical strength without compromising its corrosion resistance. This grade is roughly equivalent to the EN 1.4406 standard.
Compared to standard TP316L, TP316LN offers superior creep resistance at elevated temperatures and enhanced structural stability. Typically produced as cold-drawn seamless tubing with clean internal and external surfaces, it is well-suited for heat exchangers, condensers, instrumentation tubing, and process piping systems that require corrosion resistance even after welding.
Our TP316LN steel pipes strictly comply with the ASTM A269 standard and also meet the requirements of the ASME SA269 standard. They are available with an outer diameter (OD) ranging from 6 mm to 114.3 mm and a wall thickness ranging from 0.8 mm to 12.7 mm. Standard lengths are 6000 mm or 12000 mm, and custom-cut lengths are available upon request.



We are familiar with typical buyer pain points: inconsistent surface finish, out-of-tolerance wall thickness, sensitized material after welding, incomplete test documents and delayed shipments. Our production workflow includes online surface checking, dimensional sorting and heat batch segregation to mitigate these risks. We welcome small trial orders as well as large-scale framework project orders.
ASTM A269 TP316LN stainless steel tubing Specifcation
ASTM A269 SS 316LN Equivalent
| STANDARD | UNS | WERKSTOFF NR. |
| SS 316LN | S31635 |
– |
ASTM A269 SS 316LN stainless steel cold drawn pipe Chemical Composition
| ELEMENT | CONTENT (%) |
|---|---|
| Iron, Fe | Balance |
| Chromium, Cr | 16.0-18.0 |
| Nickel, Ni | 10.0-14.0 |
| Molybdenum, Mo | 2.0-3.0 |
| Manganese, Mn | 2.00 |
| Silicon, Si | 1.00 |
| Nitrogen, N | 0.10-0.30 |
| Phosphorous, P | 0.045 |
| Carbon, C | 0.03 |
| Sulfur, S | 0.03 |
ASTM A269 Stainless Steel 316LN Tube Mechanical Properties
| PROPERTIES | METRIC |
|---|---|
| Tensile strength | 515 MPa |
| Yield strength | 205 MPa |
| Modulus of elasticity | 190-210 GPa |
| Poisson's ratio | 0.27-0.30 |
| Elongation at break (in 50 mm) | 60% |
What is the difference between TP316L and TP316LN?
TP316L and TP316LN are molybdenum-bearing austenitic stainless steel pipe grades, but TP316LN contains controlled nitrogen to improve strength. Under ASTM A312, both typically contain 16–18% chromium and 2–3% molybdenum, while carbon is limited to 0.035% maximum. TP316LN also specifies 0.10–0.16% nitrogen, which strengthens the steel and can improve resistance to localized corrosion in suitable environments. TP316L is commonly selected for welded, corrosion-resistant piping, whereas TP316LN is preferred when higher strength is required without sacrificing low-carbon weldability.
Applications of ASTM A269 TP316LN Tubing
Heat exchangers, condensers and shell & tube heat transfer equipment
Petrochemical process piping, refinery auxiliary circuits
Chemical industry: organic acid, salt solution processing lines
Instrument tubing, control and sampling pipelines
Desalination pre-treatment and brackish water systems
Power plant auxiliary fluid systems, flue gas recovery units
Pharmaceutical and fine chemical production pipelines
Expert Note: TP316LN still has limits in high-concentration chloride, hot seawater and strong reducing acid service. For extreme chloride environments, duplex stainless steel such as 2205 / 2507 should be evaluated.

Project Case Studies (TP316LN Tube Deliveries)
Middle East Refinery Heat Exchanger Bundle Project
The EPC contractor selected TP316LN instead of standard TP316L for overhead condenser tubing handling hydrocarbon condensate with low chloride content. The requirement was post-orbital-weld resistance to intergranular corrosion plus higher design pressure rating. We delivered cold-drawn seamless tubes OD 25.4 mm × WT 2.11 mm, with 100% ET, PMI and hydrostatic test. After commissioning, the bundle has operated stably without weld-area corrosion issues.
To help you locate detailed specifications or relevant procurement records for your specific project requirements, please provide the following information:
• Required dimensions (e.g., outer diameter and wall thickness/wall thickness grade)
• Specific manufacturing standards required (e.g., piping to meet the ASTM A269 standard)
• Industry or operating environment (e.g., cryogenic conditions, pharmaceutical industry, high-temperature chemical environments, etc.)
ASTM A269 Stainless Steel Tubing Exporter
For lead time: Common stock sizes of ASTM A269 TP316LN tubes can be ready within 7–12 working days. Non-standard dimensions, special NDT demands and large bulk project orders usually take 18–28 working days. We maintain clear production schedules and regularly share order progress.
Available tube end processing: Plain cut ends, precision deburring, square cutting, chamfering and welding beveling. Plastic end caps are installed to protect bore and sealing surfaces from scratches and contamination.
Quality Inspection





Standard export packaging
Packaging options: Steel-strapped bundles wrapped with PE stretch film for standard sea shipment; plywood crates for high-spec, small-bore tubes to prevent deformation. Each bundle is permanently marked with grade, standard, OD, WT, heat number and batch number for full traceability.


Hot Tags: astm a269 tp316ln stainless steel tubes, China astm a269 tp316ln stainless steel tubes manufacturers, suppliers, factory, TP316L Stainless Steel Pipe, ASTM A213 Stainless Steel Heat Exchanger Tubes, ASTM A312 Grade 347H Stainless Steel Pipe, Food Grade 304 Stainless Steel Tube, ASTM A312 TP316L Seamless Polished Pipes, 304 Stainless Steel Round Tube
You Might Also Like
Send Inquiry










