304 Embossed Stainless Steel Plate
Surface Treatment：Polished
Technology：Cold Rolled & Hot Rolled
Thickness：1-10mm
Material：304
Packing：Standard Sea Worthy Packing
Delivery Time：3-7 Days in Stock
Specification：Can be customized
What is 304 embossed stainless steel plate?
304 stainless steel embossed sheet is a multifunctional sheet with three-dimensional patterns (such as orange peel, diamond, and pebble patterns) on the surface of 304 austenitic stainless steel substrate through roll forming process. It has the corrosion resistance of 304 material and the anti-slip, wear-resistant and decorative characteristics of embossing process. It is widely used in architectural decoration, kitchen and bathroom equipment, industrial anti-slip parts and other scenes.
stainless steel 304 chequered plate
Advantages of 304 SS embossed plate
304 stainless steel wear resistance: the pattern disperses contact stress, the wear life is extended by 1.5 times, and it can resist high-frequency trampling or mechanical friction;
304 stainless steel corrosion resistance: it has passed the 24-hour salt spray test (NSS) without rust spots, and its oil and moisture resistance is consistent with that of ordinary 304 plates;
304 stainless steel processing performance: it can be bent (minimum radius 2× plate thickness), laser cut, and there is no cracking or deformation in the pattern area.
What is the anti-slip level of 304 stainless steel checker plate? In what anti-slip scenarios is it suitable for use?
Anti-slip level: wet friction coefficient ≥ 0.6 (ASTM C1028 test), corresponding to the European anti-slip level R10 (suitable for most indoor wet and slippery environments), some deep patterns can reach R11 (suitable for industrial/outdoor high anti-slip needs).
Why Choose GNEE
Each batch provides a spectral chemical composition report (Cr≥18%, Ni≥8%), a salt spray test report (24 hours without rust spots) and a pattern depth test, and is ISO 9001 certified.
Standard patterns are in stock, and customized patterns can be delivered in 7-15 days; the board is packaged in three layers of pearl cotton + kraft paper + wooden box, and the pattern surface is covered with a protective film, and the transportation damage rate is ≤0.1%.
304 custom stainless steel plates Specification
| Thickness | 0.5 – 3.0 mm (Typical: 0.8 / 1.0 / 1.2 mm) |
| Width | 1000 mm, 1219 mm (custom widths available) |
| Length | 2000 mm, 2438 mm, 3000 mm (or as requested) |
| Pattern Types | 5WL, 6WL, Diamond, Leather Grain, Water Ripple, etc. |
| Surface Finish | 2B, No.4, Mirror, Etched, PVD Colored (Gold, Black, Bronze, etc.) |
| Embossing Depth | 0.05 – 0.25 mm (varies by pattern type) |
| Back Side Finish | Plain, PE Film Coated, Anti-fingerprint Coating |
| Packing | Standard export wooden pallets with waterproof protection |
304 Stainless Steel Plate Dealer
GNEE PACKAGING AND SHIPPING
Customer visit
Hot Tags: 304 embossed stainless steel plate, China 304 embossed stainless steel plate manufacturers, suppliers, factory, 904L Stainless Steel Plate, 310S Stainless Steel Sheet, stainless steel plate, Stainless Steel Bright Annealed Plate, Stainless Steel Mirror Plate, 316 Stainless Steel Sheets
You Might Also Like
Send Inquiry