1.4306 vs 1.4301 stainless steel
Nov 11, 2025
Leave a message
What is 1.4301 steel?
Stainless steel 304 and stainless steel 304L are also known as 1.4301 and 1.4307 respectively. Type 304 is the most versatile and widely used stainless steel. It is still sometimes referred to by its old name 18/8 which is derived from the nominal composition of type 304 being 18% chromium and 8% nickel.
What is the equivalent of 1.4306 in ASTM?
1.4306 corresponds to ASTM A240 Type 304L.
What is the material equivalent of 1.4306?
1.4306 / AISI 304L / X2CrNi19-11. 1.4306 - AISI 304L is essentially a more highly alloyed version of 1.4307. Due to the slightly higher chromium and notably higher nickel content, 1.4306 - AISI 304L is more corrosion resistant than 1.4307.
1.4306 vs 1.4301 stainless steel:Chemical Composition Comparison
| Element | 1.4301 (AISI 304) | 1.4306 (AISI 304L) |
|---|---|---|
| Carbon (C) | ≤ 0.07% | ≤ 0.03% |
| Chromium (Cr) | 17.5 – 19.5% | 17.5 – 19.5% |
| Nickel (Ni) | 8.0 – 10.5% | 10.0 – 12.0% |
| Manganese (Mn) | ≤ 2.0% | ≤ 2.0% |
| Silicon (Si) | ≤ 1.0% | ≤ 1.0% |
| Phosphorus (P) | ≤ 0.045% | ≤ 0.045% |
| Sulfur (S) | ≤ 0.03% | ≤ 0.03% |
| Nitrogen (N) | ≤ 0.10% | ≤ 0.10% |
| Iron (Fe) | Balance | Balance |
1.4306 vs 1.4301 stainless steel:Mechanical Properties
| Property | 1.4301 (304) | 1.4306 (304L) |
|---|---|---|
| Tensile Strength | 520–720 MPa | 460–680 MPa |
| Yield Strength (Rp0.2) | ≥ 210 MPa | ≥ 170 MPa |
| Elongation (A5) | ≥ 45% | ≥ 45% |
| Hardness (HB) | ≤ 215 | ≤ 200 |
| Density | 8.0 g/cm³ | 8.0 g/cm³ |
Are 1.4301 and 1.4306 interchangeable?
In many applications, yes. But for welded structures or high-purity environments, 1.4306 (304L) is preferred due to lower carbon content.
Are 1.4306 and 1.4301 magnetic?
Both are non-magnetic in the annealed condition, though they can become slightly magnetic after cold forming.
What is the difference between 1.4306 and 1.4307?
The main difference is that 1.4306 is a higher-alloyed version of 1.4307 with slightly higher chromium and nickel content, resulting in superior corrosion resistance. This makes 1.4306 more resistant to intergranular corrosion than 1.4307. In contrast, 1.4307 has a lower nickel content, which makes it more common for applications with extensive welding.
What is the difference between 1.4301 and 1.4307 stainless steel?
In summary, EN 1.4301 (AISI 304) is generally preferred when higher mechanical strength and wear resistance are required, while EN 1.4307 (AISI 304L) is a better choice for applications involving extensive welding or exposure to corrosive environments. The final choice depends on the specific needs of the application.
1.4306 stainless steel sheets Pricing
The global 304/304L stainless steel sheet and pipe market remains strong, driven by food-grade and architectural demand.
1.4306 stainless steel sheets are typically priced around US $2.8 – $3.5 per kg, while 1.4301 stainless steel ranges from US $2.5 – $3.2 per kg, depending on surface finish and thickness.
Market demand in Europe, Southeast Asia, and the Middle East continues to grow due to increased infrastructure and processing projects.
If you are looking for 1.4306 or 1.4301 stainless steel, Gnee can supply custom-cut materials and project-ready solutions at competitive factory prices, ensuring consistent quality and global logistics support.
Gnee is a reliable stainless steel supplier with over 18 years of export experience, offering a wide range of 304 and 304L (1.4301 / 1.4306) products:
✅ Stock Available: Sheets, coils, plates, pipes, tubes, round bars, and fittings.
✅ Standards: ASTM A240 / A312 / EN 10088 / DIN / JIS.
✅ Surface Finishes: 2B, BA, No.4, HL, Mirror (8K).
✅ Thickness Range: 0.3 mm – 80 mm.
✅ Certifications: ISO, SGS, BV, and EN 10204 3.1 test reports.
✅ Processing Services: Cutting, polishing, bending, welding, and packaging with moisture-proof protection.
✅ Delivery: 7–15 days worldwide.


Send Inquiry






