431 Stainless Steel: High-Strength Martensitic Stainless Steel For Structural Applications
Dec 19, 2025
Leave a message
431 stainless steel is a martensitic stainless steel with added nickel (1.25%-2.50%) and higher chromium (15%-17%) content. The nickel addition improves toughness and corrosion resistance, while maintaining high strength through heat treatment. It balances strength, toughness and corrosion resistance, making it suitable for load-bearing structural components and high-stress mechanical parts.

Core Parameters
Chemical Composition (wt%): C≤0.20, Si≤1.00, Mn≤1.00, P≤0.040, S≤0.030, Cr=15.00-17.00, Ni=1.25-2.50, Fe=Balance
Mechanical Properties (Quenched & Tempered): Tensile Strength ≥860MPa, Yield Strength ≥620MPa, Elongation ≥15%, Hardness ≥241HB (annealed) / ≥36HRC (quenched & tempered)
Service Temperature: -40℃ to 300℃ (continuous service)
Equivalent Grades: SUS431 (JIS), EN 1.4057 (EN), UNS S43100 (ASTM)
Performance Advantages: Higher toughness than 420 stainless steel due to nickel addition; good corrosion resistance in atmospheric, fresh water and mild acid environments; high strength and fatigue resistance after heat treatment; excellent weldability and machinability; magnetic.
Typical Applications: Automotive components (drive shafts, suspension parts, brake calipers), aircraft structural parts, high-pressure valve stems, pump shafts for medium-corrosion environments, fasteners for high-strength requirements, marine hardware.

Practical Q&A
Q1: What is the effect of nickel in 431 stainless steel? A1: Nickel mainly plays a role in stabilizing the austenite phase during heat treatment, refining martensite grains, thereby improving toughness and reducing brittleness. Compared with 420 (no nickel), 431's impact toughness is increased by more than 50%, making it suitable for components subject to impact loads.
Q2: What heat treatment process is recommended for 431 stainless steel? A2: For high-strength requirements: quenching (950-1050℃, oil cooling) + tempering (200-300℃, air cooling), achieving hardness 36-42HRC. For high-toughness requirements: quenching (950-1050℃, oil cooling) + tempering (500-600℃, air cooling), hardness 28-32HRC, with significantly improved toughness.
Q3: Is 431 stainless steel suitable for low-temperature environments? A3: Yes, it can be used at -40℃. Its low-temperature impact toughness (≥35J at -40℃) is better than 420 stainless steel, making it suitable for low-temperature structural components such as automotive parts in cold regions. For temperatures below -40℃, 304L or 316L austenitic stainless steel is recommended.

Q4: How does 431 stainless steel perform in marine environments? A4: It has good corrosion resistance in marine atmospheric environments (such as ship decks, railings), but is not suitable for long-term immersion in seawater. For seawater-immersed components, 316L or duplex stainless steel should be used. 431 can be used for marine hardware in non-immersed areas.
Q5: What is the difference between 431 and 17-4PH stainless steel? A5: 17-4PH is a precipitation hardening stainless steel with higher strength (tensile strength ≥1030MPa) and better corrosion resistance than 431, but higher cost. 431 is more cost-effective and suitable for medium-strength and medium-corrosion applications, while 17-4PH is used for high-strength and high-corrosion precision components.
Send Inquiry






