ASTM B677 UNS N08904 Seamless Pipe: 904L for General Corrosive Service

Nov 05, 2025

Leave a message

What Is ASTM B677

ASTM B677 is the standard specification for seamless pipe and tube made from UNS N08904, N08925, and N08926, nickel-bearing super austenitic stainless steels intended for general corrosive service. The most widely used grade, UNS N08904, corresponds to 904L and was originally developed for dilute sulfuric acid applications before becoming a general-purpose material for the chemical industry.

Chemical Composition

904L contains chromium 19.0 to 23.0 percent, nickel 23.0 to 28.0 percent, molybdenum 4.0 to 5.0 percent, copper 1.0 to 2.0 percent, carbon 0.02 percent maximum, manganese 2.0 percent, silicon 1.0 percent, phosphorus 0.045 percent, and sulfur 0.035 percent. The copper addition is the key to its excellent resistance to reducing acids such as sulfuric acid.

Mechanical Properties

Seamless pipe has a minimum tensile strength of 490 MPa, a minimum yield strength of 220 MPa, and a minimum elongation of 36 percent, with typical hardness of 150 HB. Compared with welded 904L pipe, the seamless product offers higher load-bearing capacity and avoids the weld seam as a potential corrosion site.

Heat Treatment

Pipe is supplied in the hot-worked or cold-worked condition, solution annealed at high temperature and water quenched or otherwise rapidly cooled. This treatment restores the fully austenitic microstructure and optimum corrosion resistance.

Applications

904L pipe is used in chemical processing for sulfuric and phosphoric acid service, seawater cooling systems, oil and gas equipment, paper and fertilizer plants, and pharmaceutical and pollution control installations. It resists pitting, crevice corrosion, and stress corrosion cracking in chloride and reducing acid environments.

Procurement Guidance

Specify the size, schedule, length, surface finish, and testing requirements. Testing options include chemical analysis, tensile and hardness testing, flattening and flaring tests, pitting resistance and intergranular corrosion tests, PMI, and radiography where required. Request mill certificates and third-party inspection for critical projects.

Frequently Asked Questions

Q: What is UNS N08904?

A: The designation for 904L super austenitic stainless steel.

Q: What standard covers 904L seamless pipe?

A: ASTM B677.

Q: What is the tensile strength of 904L pipe?

A: 490 MPa minimum.

Q: Why was 904L developed?

A: For dilute sulfuric acid service.

Q: What environments suit 904L?

A: Sulfuric and phosphoric acids, seawater, and chloride-bearing media.

Q: What is the equivalent of 904L?

A: EN 1.4539, X1NiCrMoCuN25-20-5, and BS 904S13.

Contact us for ASTM B677 UNS N08904 seamless pipes with certified test reports and project-based quotations.

Send Inquiry