Difference Between Stainless Steel 304 Vs 304L
Dec 23, 2025
Leave a message
Stainless steel 304 and 304L both has a minimum of 18% chromium and 8% nickel. The main difference between the 304 and 304L is their carbon content, Type 304L has max carbon content of 0.03% whereas 304 SS has maximum carbon of 0.07%. This difference in carbon content affects their corrosion resistance and mechanical properties.
When to use 304 SS?
AISI 304 are used in corrosive application due to its higher carbon content. It does not corrode easily and have better Tensile and Yield strength properties as compared to 304L. It is widely used material in industries like food and beverage, medical equipment and kitchen appliances. Its ease of fabrication and cleaning makes it suitable choice.
When to use 304L SS?
SS 304L is nothing but a variant of 304 with lower carbon content. This lower carbon content provides AISI 304L good corrosion resistance and welding performance. Lower carbon content minimizes carbide precipitation in heat affected zone at the time of welding, which prevents from intergranular corrosion. This material is widely used in chemical industry, petroleum industry and food processing industry.
Difference between AISI 304 and 304L
| Property | SS 304 | SS 304L |
|---|---|---|
| Carbon Content | Max 0.08% | Max 0.03% |
| Weldability | Moderate | Excellent |
| Strength | Higher | Slightly Lower |
| Corrosion Resistance | Good | Better |
304 vs 304l stainless steel Corrosion
| Environment | SS 304 | SS 304L |
|---|---|---|
| General corrosion | Excellent | Excellent |
| Welded condition | May suffer sensitization | Superior |
| Oxidation resistance | Good up to ~870°C | Slightly better stability |
Machinability Comparison of SS 304 Vs 304L
| Property | 304 | 304L |
|---|---|---|
| Machinability Rating | ~45% (based on free-machining steel = 100%) | ~45% |
SS 304 VS SS 304L chemical composition
| Element | SS 304 | SS 304L |
|---|---|---|
| Carbon (C) | ≤ 0.08% | ≤ 0.030% |
| Chromium (Cr) | 18.0–20.0% | 18.0–20.0% |
| Nickel (Ni) | 8.0–10.5% | 8.0–12.0% |
| Manganese (Mn) | ≤ 2.0% | ≤ 2.0% |
| Silicon (Si) | ≤ 1.0% | ≤ 1.0% |
| Phosphorus (P) | ≤ 0.045% | ≤ 0.045% |
| Sulfur (S) | ≤ 0.030% | ≤ 0.030% |
| Nitrogen (N) | ≤ 0.10% | ≤ 0.10% |
| Iron (Fe) | Balance | Balance |
Stainless Steel 304 Vs 304L Mechanical Properties
| Property | SS 304 | SS 304L |
|---|---|---|
| Tensile Strength (MPa) | ≥ 515 | ≥ 485 |
| Yield Strength (MPa) | ≥ 205 | ≥ 170 |
| Elongation (%) | ≥ 40 | ≥ 40 |
| Hardness (HRB) | ≤ 95 | ≤ 95 |
Stainless Steel 304 Vs 304L Equivalent Grade
| Standard | AISI 304 | AISI 304L |
|---|---|---|
| UNS | UNS S30400 | UNS S30403 |
| EN/DIN (Europe) | 1.4301 | 1.4307 |
| JIS (Japan) | SUS 304 | SUS 304L |
| BS (UK) | 304S31 | 304S11 |
| AFNOR (France) | Z7CN18-09 | Z2CN18-10 |
| GOST (Russia) | 08Х18Н10 | 03Х18Н11 |
| IS (India) | X04Cr19Ni9 | X04Cr19Ni9 (Low Carbon) |
Stainless Steel 304 Vs 304L Physical Properties
| Property | Value |
|---|---|
| Density | 8.0 g/cm³ |
| Melting Point | 1400–1450°C |
| Thermal Conductivity | 16.2 W/m·K (at 100°C) |
| Electrical Resistivity | 0.72 µΩ·m (at 20°C) |
| Modulus of Elasticity | 193 GPa |
Stainless Steel 304 Vs 304L Hardness
| Condition | Grade | Brinell Hardness (HB) |
|---|---|---|
| Annealed (Soft) | 304 | 150 – 200 |
| 304L | 140 – 190 | |
| Cold Worked (Hard) | 304 | 250 – 300 |
| 304L | 230 – 280 |
How to choose between SS 304 Vs 304L?
If you want higher strength, welding is minimum or not at all required and operating below 425°C then you should go for Stainless steel 304 Material.
If your application involves welding and concerned about sensitization and want better corrosion resistance in the heat affected zone then you should buy AISI 304L Material.
We provide a comprehensive range of stainless steel grades, including the widely used 304 and 316 series, as well as specialized grades such as 430, 201, duplex, and super austenitic steels, tailored to meet diverse industrial and environmental requirements. Whether you need corrosion-resistant solutions for marine applications, food-grade compliance, high-temperature durability, or custom specifications, our expert team is ready to assist.
Our factory
As a professional stainless steel product manufacturer, we possess a complete modern production line encompassing precision slitting, laser cutting, CNC bending, automatic welding, and sophisticated surface treatment. Leveraging advanced processing equipment and a rigorous quality control system, we specialize in producing high-quality stainless steel products that meet international standards, including industrial components, building materials, household goods, and special customized parts.
Stainless steel packaging
To ensure that our stainless steel products are protected from scratches, impacts, and corrosion during transportation and storage, we provide professional packaging solutions: precision surfaces are protected with electrostatic protective film or peelable anti-corrosion coatings; pipes and plates are secured with waterproof wrapping film and custom-made corner protectors; standard parts are packaged in anti-rust bags and blister trays; and outer cartons are clearly marked with moisture-proof and "this side up" labels. All packaging adheres to export standards, balancing protection, environmental friendliness, and ease of unpacking, guaranteeing that products arrive in perfect condition to our global customers.
Send Inquiry