Grade 410 (UNS S41000) stainless steel
Feb 02, 2026
Leave a message
Key Properties
The properties displayed below are applicable to bar products of ASTM A276. Other products such as forgings, wire and plate may not have similar properties.
Composition
The compositional ranges of grade 410 stainless steels are displayed below.
Table 1 - Composition ranges of grade 410 stainless steels
| Grade | C | Mn | Si | P | S | Cr | Ni | |
|---|---|---|---|---|---|---|---|---|
| 410 | min. max. |
- 0.15 |
- 1 |
- 1 |
- 0.04 |
- 0.03 |
11.5 13.5 |
0.75 |
Mechanical Properties
The typical mechanical properties of grade 410 stainless steels are listed in the following table:
Table 2 - Mechanical properties of grade 410 stainless steels
| Tempering Temperature (°C) | Tensile Strength (MPa) | Yield Strength 0.2% Proof (MPa) | Elongation (% in 50 mm) | Hardness Brinell (HB) | Impact Charpy V (J) |
|---|---|---|---|---|---|
| Annealed * | 480 min | 275 min | 16 min | - | - |
| 204 | 1475 | 1005 | 11 | 400 | 30 |
| 316 | 1470 | 961 | 18 | 400 | 36 |
| 427 | 1340 | 920 | 18.5 | 405 | # |
| 538 | 985 | 730 | 16 | 321 | # |
| 593 | 870 | 675 | 20 | 255 | 39 |
| 650 | 300 | 270 | 29.5 | 225 | 80 |
Send Inquiry