STS321 Stainless Steel: Standards and Chemical Composition
Dec 18, 2025
Leave a message
What is STS 321 stainless steel?
STS 321 is a titanium-stabilized austenitic stainless steel, similar to Type 304 but with added titanium to prevent chromium carbide formation at high temperatures, making it excellent for welding and high-heat applications (800-1500°F / 427-816°C) like aircraft exhaust, chemical processing, and boiler parts, offering superior intergranular corrosion resistance, oxidation resistance, and creep strength.
What Is STS 321 Stainless Steel Standard?
STS 321 is a titanium-stabilized austenitic stainless steel, essentially a Type 304 stainless steel with added titanium, designed for high-temperature environments (up to approximately 1600°F/900°C) to resist carbide precipitation and intergranular corrosion. It typically conforms to standards such as ASTM A240 and is equivalent to the JIS SUS 321 grade.
Equivalent Grades of 321 Stainless Steel
| Country/Region | Standard/Specification | Equivalent Grade |
| China | GB/T 20878, GB 4234 | 0Cr18Ni10Ti, 1Cr18Ni11Ti, H0Cr20Ni10Ti |
| USA | ASTM A240, ASME SA240 | 321 |
| EU | EN 10088-2 | X6CrNiTi18-10 (1.4541) |
| Germany | DIN 17440, DIN EN 10088-2 | X10CrNiTi18-9, X6CrNiTi18-10 |
| GOST 5632 | 08KH18N10T, 08KH18N12T, 12KH18N10T | |
| Japan | JIS G4304, JIS G4303 | SUS321 |
| England | BS 1449, BS EN 10088-2 | 321S31 |
What is the chemical composition of STS 321?
321 stainless steel is a stabilized version of 304 stainless steel. It consists of 18% chromium and 8% nickel, with the addition of titanium, which allows 321 stainless steel to prevent intergranular corrosion that may occur after heat treatment.
| Element | Carbon, C | Chromium, Cr | Iron, Fe | Manganese, Mn | Nickel, Ni | Nitrogen, N | Phosphorus, P | Silicon, Si | Sulfur, S | Titanium, Ti |
| wt% | ≤ 0.080 | 17 – 19 | Balance | ≤ 2.0 | 9 – 12 | ≤ 0.10 | ≤ 0.045 | ≤ 0.75 | ≤ 0.030 | ≤ 0.70 |
STS 321 Stainless Steel Physical Properties
| Property | Typical Value (Metric/Imperial) |
| Density | 9.01 g/cc (0.326 lb/in³) |
| Melting Point | 1371 – 1399°C (2500 – 2550°F) |
| CTE, Linear (0 – 100°C) | 16.6 µm/m-°C (9.22 µin/in-°F) |
| CTE, Linear (≤ 871°C) | 20.2 µm/m-°C (11.2 µin/in-°F) |
| Specific Heat Capacity | 0.500 J/g-°C (0.120 BTU/lb-°F) |
| Thermal Conductivity (100°C) | 16.0 W/m-K (111 BTU-in/hr-ft²-°F) |
| Thermal Conductivity (500°C) | 22.0 W/m-K (153 BTU-in/hr-ft²-°F) |
| Electrical Resistivity | 0.0000720 ohm-cm |
| Magnetic Permeability | ≤ 1.02 |
STS 321 Stainless Steel Mechanical Properties
| Property | Value (Metric/Imperial) |
| Tensile Strength | 621 MPa (90.1 ksi) |
| Yield Strength | 276 MPa (40.0 ksi) |
| Rockwell Hardness | 80 HRB |
| Elongation at Break | 45% (in 2 inches) |
| Young's Modulus | 193 GPa (28.0 msi) |
Is 321 stainless steel magnetic?
Stainless steel 321 is generally non-magnetic in its annealed condition, but it may become slightly magnetic after cold working.
Is 321 stainless steel food safe?
Yes, 321 stainless steel is considered food safe and is widely used in food processing equipment, especially for high-temperature applications like industrial ovens, baking trays, and steam systems, due to its excellent corrosion resistance, titanium stabilization (preventing carbide issues), and ease of cleaning, ensuring hygiene and preventing contamination.
Can you weld 304 stainless steel to 321 stainless steel?
Yes, you can weld ss 304 to ss 321. However, it's recommended to use a filler material like 347 stainless steel to maintain stability at high temperatures.

who choose us?
GNEE currently has SUS 321 (UNS S32100) products in stock, including: plates, sheets, coils, strips, tubes, bars, and wires. In addition, we offer a variety of surface finishes for you to choose from, such as: No.1, 2B, 2D, BA, No.3, No.4, HL, No.8, sandblasting, etc.
We guarantee 100% quality. We will never deliver any defective products to our customers. Please contact us to customize your required product specifications, including shape, condition, surface treatment, and processing technology.
If you could provide details regarding the product form (plate, rod, or coil), dimensions, and required quantity, we would be able to offer you a competitive price.
Send Inquiry






