AISI 444/ UNS S44400/1.4521 Equivalent, Properties & Applications
Mar 17, 2026
Leave a message
1.4521 stainless steel is a ferritic stainless steel grade designated X2CrMoTi18-2 under EN standards and commonly associated with AISI 444 / UNS S44400. It contains approximately 17–20% chromium and 1.8–2.5% molybdenum, with titanium stabilization. This combination provides good resistance to chloride pitting, crevice corrosion and stress corrosion cracking, making 1.4521 suitable for water heaters, heat exchangers, automotive exhaust systems and other applications where low thermal expansion and chloride resistance are required.
1.4521 Stainless Steel Equivalent Grades
| Standard / System | Grade / Designation |
|---|---|
| EN | 1.4521 |
| EN Chemical Name | X2CrMoTi18-2 |
| AISI | 444 |
| UNS | S44400 |
| JIS | SUS444 |
| KS | STS444 |
| AFNOR | Z3CDT18-02 |
| Swedish SS | 2326 |
1.4521 Stainless Steel Chemical Composition
| Element | Requirement, wt.% |
|---|---|
| Carbon (C) | ≤ 0.025 |
| Silicon (Si) | ≤ 1.00 |
| Manganese (Mn) | ≤ 1.00 |
| Phosphorus (P) | ≤ 0.040 |
| Sulfur (S) | ≤ 0.015 |
| Chromium (Cr) | 17.0–20.0 |
| Molybdenum (Mo) | 1.75–2.50 |
| Nitrogen (N) | ≤ 0.030 |
| Titanium (Ti) | Stabilized; see applicable standard |
| Nickel (Ni) | No intentional addition |
Mechanical Properties of 1.4521 Stainless Steel
| Property | Typical / Standard Requirement |
|---|---|
| Yield Strength, Rp0.2 | ≥ 280 MPa |
| Tensile Strength, Rm | 420–640 MPa |
| Elongation, A | ≥ 20% |
| Hardness, HB | ≤ 200 |
Mechanical properties vary according to product form, thickness and delivery condition. Always verify the applicable EN 10088 product specification before purchasing.
Physical Properties of 1.4521 Stainless Steel
| Property | Approximate Value |
|---|---|
| Density | 7.7 g/cm³ |
| Thermal Conductivity at 20°C | ~25 W/m·K |
| Coefficient of Thermal Expansion | Lower than 304/316L |
| Elastic Modulus | ~200 GPa |
| Magnetic Property | Magnetic |
Is 1.4521 the same as 444 stainless steel?
Yes, they are the same. 1.4521 is the numerical designation under European standards (EN 10088 / X2CrMoTi18-2), while AISI 444 (UNS S44400) is the American standard designation; both refer to the same type of high-molybdenum, ultra-low carbon and nitrogen, dual-stabilized ferritic stainless steel.
Is 1.4521 stainless steel magnetic?
Yes, it is strongly magnetic. 1.4521 has a purely ferritic microstructure and retains its magnetism whether in the annealed state or after cold working (similar to ordinary carbon steel).
Is 1.4521 stainless steel corrosion-resistant?
It is highly corrosion-resistant and outperforms 316L in terms of resistance to stress corrosion cracking. Pitting resistance: With a composition of 17.5–19.5% Cr and 1.75–2.5% Mo, its Pitting Resistance Equivalent Number (PREN) is approximately 24–25 (higher than the PREN of ~18 for 304 and comparable to the PREN of ~25 for 316L). Resistance to stress corrosion cracking (SCC): Thanks to its ferritic matrix, it is completely immune to chloride-induced stress corrosion cracking in high-temperature, chloride-containing aqueous environments (such as water heaters and heat exchangers), whereas austenitic steels like 304 and 316L are prone to cracking in such conditions.
Can 1.4521 stainless steel be welded?
Yes, it can be welded, but the process requires strict control.
Dual-stabilization protection: The addition of titanium (Ti) and niobium (Nb) effectively binds carbon and nitrogen, significantly reducing the risk of intergranular corrosion in the heat-affected zone (HAZ).
Welding considerations: Ferritic grains tend to coarsen at high temperatures, leading to reduced toughness; therefore, it is recommended to control heat input and prioritize the use of over-alloyed austenitic filler materials (such as 316L, 309L, or 2205) to enhance joint ductility.
What are the applications of 1.4521 stainless steel?
Water Treatment and HVAC Systems: Solar water heater tanks, potable water storage tanks, heat exchangers, and piping.
Food and Pharmaceutical Equipment: Processing equipment resistant to chloride-based cleaning agents, as well as winemaking and brewing vessels.
Construction and Industry: Exterior cladding panels for coastal buildings, roofing materials, and industrial evaporators.
Automotive Systems: High-temperature components of automotive exhaust systems.
How does 444 (1.4521) compare to 316L stainless steel?
Grade 444 (EN 1.4521) is a ferritic stainless steel that matches the pitting corrosion resistance of austenitic 316L while offering superior resistance to chloride stress corrosion cracking (SCC), higher yield strength, and magnetic properties, but with lower cost and more limited weldability in thicker sections.
| Property | 1.4521 / 444 | 316L / 1.4404 |
|---|---|---|
| Stainless Steel Family | Ferritic | Austenitic |
| Chromium | ~17–20% | ~16.5–18.5% |
| Molybdenum | ~1.75–2.5% | ~2–3% |
| Nickel | Very low / no intentional addition | ~10–14% |
| Magnetic | Yes | Generally non-magnetic |
| Chloride SCC Resistance | Excellent | Good, but more susceptible than ferritic grades |
| Typical Applications | Water heaters, heat exchangers | Chemical, food, marine |
Looking for a Reliable Supplier of 1.4521 / 444 Stainless Steel?
GNEE Steel supplies high-performance 444 (1.4521) stainless steel in sheet, coil, plate, tube, and strip forms, ideal for water heater, heat exchanger, and food processing applications. We provide full material certification (EN 10204 3.1) and processing support including cutting, bending, welding, and surface finishing services. If you have any requirements, please feel free to contact us.
GNEE Steel offers AISI 444 in various product forms optimized for the water heating and heat exchanger industries:
| Product Form | Common Specifications |
| Cold Rolled Sheets/Coils | Thickness: 0.3mm – 3.0mm |
| Hot Rolled Plates | Thickness: 3.0mm – 20mm |
| Welded Tubes | For heat exchangers and water tanks |
| Surface Finishes | 2B, BA, No.4, HL (Hairline) |



If you require technical data sheets or a quote for AISI 444 / 1.4521, please provide GNEE with your required thickness and application details.
Send Inquiry






