Zeron 100 / F55 (UNS S32760): The Tungsten-Enhanced Super Duplex Stainless Steel

Dec 11, 2025

Leave a message

F55F55F55

 

What is the chemical composition, key advantage, and primary application of Zeron 100 super duplex stainless steel?
Zeron 100 has a balanced composition of about 25% Cr, 7% Ni, 3.5% Mo, 0.7% W, 0.25% N, and 1% Cu. This gives it a very high Pitting Resistance Equivalent Number (PREN >40) for outstanding pitting/crevice corrosion resistance and very high mechanical strength (~550 MPa yield). Its key advantage is delivering performance close to nickel alloys at a fraction of the cost. It is specified for critical components in offshore oil & gas (risers, manifolds), seawater cooling systems, chemical tankers, and flue gas desulfurization scrubbers.

How does its corrosion resistance compare to standard duplex 2205 and other super duplex grades?
Zeron 100 provides a significant step up in corrosion resistance from duplex 2205, particularly in environments with high chloride levels, low pH, and the presence of H2S (sour service). The synergistic effect of tungsten with molybdenum further enhances its resistance to localized corrosion. Compared to other super duplex grades like 2507, its addition of copper and tungsten gives it better performance in reducing acids and broader effectiveness in mixed chemical environments, offering a versatile solution for severe conditions.

What are the most critical considerations for welding and fabricating Zeron 100?
Welding Zeron 100 demands strict procedure control to avoid harmful intermetallic phase precipitation. Key practices include using matching or over-alloyed filler metals (e.g., Zeron 100X), maintaining a very low interpass temperature (typically below 100°C), and carefully controlling heat input. Its high strength requires more powerful equipment for forming and machining. Fabrication should only be undertaken by shops with proven expertise in super duplex stainless steels and qualified welding procedures to ensure the final product retains its designed properties.

In which applications does investing in Zeron 100 offer the best lifecycle cost advantage?
The investment is justified in applications where equipment failure carries extreme economic, safety, or environmental risk. This includes subsea oil & gas components, seawater-cooled heat exchangers in power plants, and critical process piping in chemical plants handling aggressive chlorides and acids. While its initial cost is higher than standard duplex, its superior durability often eliminates the need for chemical inhibition, cathodic protection, or premature replacement, resulting in a lower total cost of ownership over the asset's life.

What final specification and quality assurance steps are mandatory for this premium alloy?
Procurement must be based on a detailed technical specification requiring a full mill test certificate that confirms the precise chemistry-especially tungsten, copper, and nitrogen content-and a guaranteed minimum PREN. Impact toughness testing at the design temperature is often required. A weld procedure qualification test (WPQR) must be conducted before production welding. For critical components, non-destructive testing and possibly selective corrosion testing of welds are recommended to ensure integrity. Partnering with a reputable mill and experienced fabricator is non-negotiable.

Send Inquiry