15-5PH Stainless Steel Plate & Sheet
Nov 28, 2025
Leave a message
If you are looking for 15-5PH stainless steel plate and sheet, GNEE offers high-quality 15-5PH in solution-annealed and precipitation-hardened conditions, providing excellent corrosion resistance, high strength, and good toughness. This material is widely used in aerospace, chemical processing, and high-performance mechanical applications.
Our products: 15-5PH round bar, 15-5PH flat bar, 15-5PH square bar, 15-5PH plate, 15-5PH sheet, 1.4545 cold rolled plate, 15-5PH hot rolled sheet, S15500 rectangular bar, 15-5PH cold drawn bar, 15-5PH precision ground bar, 15-5PH forged bar, 15-5PH polished plate, 15-5PH tempered sheet, etc.

15-5PH Stainless Steel Plate & Sheet Specification
| Standard |
AMS 5659, AMS 5823, AMS 5862, ASTM A564 / A564M, ASTM A693 |
|---|---|
| Grade |
0Cr15Ni5Cu4Nb, 1.4545, S15500 |
| Length |
1000 mm-6000 mm (39.37-236.22 in), Customized |
| Diameter |
Bar: 6 mm-300 mm (0.24-12 in), Customized |
| Thinckness |
Customized, Plate: 6 mm-100 mm (0.24-3.94 in), Sheet: 0.5 mm-6 mm (0.02-0.24 in) |
| Full Width |
Customized, Sheet & Plate: 1000 mm-2000 mm (39.37-78.74 in) |
| Surface Finish |
2B, 2D, BA, Coated, etc., Ground, Mill, No.1, No.4, Peeled, Polished, Turned |
| Form |
15-5PH Forged bar, 15-5PH plate, 15-5PH Polished plate, 15-5PH sheet, 15-5PH Tempered sheet, Coil, Cold Drawn Bar, Cold-Rolled Plate, etc., Flat Bar, Hot-rolled sheet, Rectangular bar, Rod, Round Bar, Square Bar, Strip |
What is 15 5ph stainless steel equivalent to?
15-5 PH stainless steel is equivalent to UNS S15500 or XM-12 and is a higher-strength, tougher version of 17-4 PH stainless steel. It has properties that make it comparable to both 304 stainless steel and 400 series stainless steels in corrosion resistance.
What is the difference between ss304 and 15 5ph?
The main difference is that 304 stainless steel is a general-purpose austenitic stainless steel known for its corrosion resistance and ductility, while 15-5 PH is a martensitic precipitation-hardening stainless steel that achieves high strength and hardness through heat treatment. This makes 15-5 PH much stronger and harder, but 304 more corrosion-resistant in typical environments.
We supply products that comply with ASTM A564, AMS 5504/5505, and EN 10088-2 standards, and provide full ISO 9001, SGS, BV certifications, and Mill Test Certificates (MTC 3.1/3.2). Thickness ranges from 0.5 mm to 100 mm, width up to 2000 mm, and length customizable per project requirements. Free samples are available to verify quality before placing bulk orders.

Send Inquiry






