440A 440B 440C Stainless Steel Flat Bar
Jan 09, 2026
Leave a message
Whether you need 440A for moderate wear applications, 440B for medium-to-high hardness applications, or 440C for the highest hardness applications, Gnee offers high-quality 440 series stainless steel flat bars, including 440A, 440B, and 440C, specifically designed for cutting tools, industrial shafts, valves, and precision machinery components. Custom sizes, lengths, and surface finishes are available, along with complete traceability and certification.
What is the difference between 440A, 440B, and 440C stainless steel flat bars?
440A: Lower carbon, good corrosion resistance, moderate hardness (50–54 HRC)
440B: Medium carbon, balanced hardness and toughness (55–58 HRC)
440C: High carbon, maximum hardness and wear resistance (58–60 HRC)


High Hardness 440A 440B 440C Stainless Steel Flat
| Products | Stainess Steel Flat Bar |
| Grade |
440A 440B 440C |
| Standard | ASTM GB EN JIS |
| Thickness | 4.0 - 100mm |
| Width | 20 - 400mm customs as request |
| Surface Finishing | Pickling , Hairline , Polished |
| Servie | Cutting , Heat treatment |
| Other Grade |
200 Series:201 202 300 Series: 301 304 304L 304H 309S 310S 314 316L 316Ti 317L 321 347 400 Series: 409L 410 420 430 431 440A/B/C |
| Application | Structure , Decoration , household, furniture , decoration,Mechanical processing |
| Other Products | Stainless Steel Plate / Sheet / Pipe / Bars / Strips.etc |
440A / 440B / 440C Stainless Steel Flat Bar – Specifications
| Grade | Carbon (C) | Hardness (HRC) | Typical Applications |
|---|---|---|---|
| 440A | 0.60 – 0.75% | 50–54 (HRC after quench) | Cutting tools, shafts, moderate wear parts |
| 440B | 0.75 – 0.95% | 55–58 (HRC after quench) | Blades, precision tools, valve components |
| 440C | 0.95 – 1.20% | 58–60 (HRC after quench) | High-precision knives, bearings, wear-resistant parts |
Mechanical Properties (Typical, After Heat Treatment)
| Grade | Tensile Strength (MPa) | Yield Strength (MPa) | Elongation (%) | Hardness (HRC) |
|---|---|---|---|---|
| 440A | 700–850 | 450–550 | 15–20 | 50–54 |
| 440B | 800–950 | 500–600 | 12–18 | 55–58 |
| 440C | 900–1100 | 550–700 | 10–15 | 58–60 |
Can 440 series stainless steel flat bars be heat treated?
Yes. All 440 series flat bars are fully hardenable, achieving high hardness and excellent wear resistance after quenching and tempering.
Are these flat bars suitable for machining?
Yes. 440A is easier to machine, while 440B and 440C require careful machining due to higher hardness after heat treatment.
What sizes and finishes are available?
Flat bars are available in custom width (10–200 mm), thickness (3–50 mm), and length (1000–6000 mm), with hot rolled, annealed, or ground surfaces.
440A, 440B, and 440C stainless steel flat bars are the perfect choice for high-hardness, wear-resistant, and precision industrial components. Gnee's range of customizable flat bars ensures reliable performance, consistent quality, and optimal cost-efficiency, making them ideal for cutting tools, shafts, valves, and precision engineering applications.
📩 Contact Gnee today to request a quote, discuss custom sizes, or get technical support for your 440 series stainless steel flat bar requirements.
Obtain customized 440A, 440B, and 440 solutions.

Send Inquiry






