What Is SS 316 Ti Spring Steel?
Jan 12, 2026
Leave a message
What is SS316 Ti spring steel?
SS316 Ti spring steel is a high-strength titanium alloy spring steel widely used in automotive leaf springs, industrial machinery, and heavy-duty suspension components.


SS316 Ti spring steel Specifications
| Item | Specification |
|---|---|
| Material Grade | SS316Ti |
| Type | Spring Hard Steel |
| Thickness | 2 mm |
| Standard Sheet Size | 4' x 8' (1220mm x 2440mm) |
| Alternate Form | Strip coils available (custom width/length) |
| Surface Finish | Hot rolled / Pickled (optional) |
| Heat Treatment | Quenched & Tempered (for high fatigue strength) |
Mechanical Properties (Typical)
| Property | Value |
|---|---|
| Tensile Strength | 1400–1600 MPa |
| Yield Strength | 1200–1400 MPa |
| Hardness (HRC) | 45–50 |
| Elongation | 10–12% |
| Fatigue Resistance | Excellent |
✅ Note: Properties may vary with batch and heat treatment. Always check mill test certificates (MTC) for verification.
Applications Of SS316 Ti spring steel
SS361Ti is ideal for components that endure Repeated Stress Cycles, such as:
Automotive leaf springs and suspension assemblies
Multi-leaf and single-leaf spring sets
Heavy vehicles and agricultural machinery springs
Industrial machinery springs and mechanical components
Custom leaf spring production from Strip Coils to reduce material waste
⚡ Tip For Buyers: Strip coils are recommended for Custom-Width Leaf Springs, minimizing cutting and handling costs.
Can SS316 Ti Be Used For Heavy Trucks Leaf Springs?
Yes, SS316Ti 2mm–6mm sheets are suitable for Heavy-Duty And Multi-Leaf Spring Applications, offering high fatigue resistance and long service life.
Is 2mm Thickness Enough For Automotive Leaf Springs?
2mm is ideal for Light To Medium-Duty Leaf Springs; thicker sheets (3–6mm) may be required for heavy vehicles.
Can Smaller Strip Coils Replace Full 4' X 8' Sheets?
Absolutely. Strip Coils Minimize Waste and are often preferred for custom leaf spring production.
How Does SS316 Ti Compare With 65Mn Or 50CrV4 Spring Steel?
SS316Ti offers Higher Corrosion Resistance and comparable fatigue strength, making it suitable for Outdoor And Wet Environments, unlike conventional carbon spring steels.
Purchasing Guidance
When sourcing SS361Ti 2mm Spring Hard Steel Sheets Or Strip Coils, buyers should:
Specify Sheet Vs Coil Size depending on forming requirements
Confirm Mill Test Certificates for tensile, hardness, and composition
Ensure compatibility with Leaf Spring Forming And Tempering Processes
Plan lead time for Custom Coil Widths or smaller quantities
GNEE Related Products:
SS321 Spring Steel Sheets
SS361Ti Hot Rolled Coils
Automotive Leaf Spring Materials
Send Inquiry






