ASME SA213 TP316/316L Seamless Stainless Steel Tube

ASME SA213 TP316/316L Seamless Stainless Steel Tube

Product Name:ASME SA213 TP316/316L Seamless Stainless Steel Tube
Material Grade:TP316 / TP316L/S31600 / S31603
Manufacturing Process:Seamless, Cold Drawn, Cold Rolled, Hot Finished
Production Method:Cold Finished / Hot Finished
Outer Diameter (OD):3–127 mm
Wall Thickness (WT):0.5–12.7 mm
Length:3–12 m or Customized
Delivery Condition:Solution Annealed
Surface Finish:Pickled, Bright Annealed (BA), Polished
Heat Treatment Temperature:1040°C (1900°F) Minimum
Packaging:Wooden Cases, Wooden Pallets, Steel Bundles
Send Inquiry
Chat Now

During the manufacturing of heat exchangers and boiler tube bundles, do you frequently encounter challenges such as difficulty inserting tubes into tubesheets, inconsistent tube expansion results, or premature corrosion caused by uneven hardness, straightness deviations, or internal surface defects?

If your project requires materials that offer both the high-temperature strength of TP316 and the superior weld-corrosion resistance of TP316L, our ASME SA213 TP316/TP316L dual-certified seamless stainless steel tubes are the ideal solution. Specifically engineered to address these

manufacturing hurdles and reliability concerns, they are an excellent choice for OEMs of pressure equipment and EPC contractors.

 

Our TP316/TP316L dual-grade material is produced via a low-carbon smelting process (carbon content C ≤ 0.03%), ensuring that a single heat meets the mechanical and corrosion-resistance requirements for both UNS S31600 (TP316) and UNS S31603 (TP316L). While the ASME SA213 standard permits a hardness of up to 95 HRB for TP316/TP316L tubes, we enforce stricter internal controls, capping hardness at 84 HRB per batch to guarantee exceptional ductility and superior performance during the tube-expansion process.

 

Manufactured using a cold-working process and subjected to multi-roll straightening followed by 100% inspection, our SA213 TP316L tubes achieve a maximum straightness deviation of ≤ 1.0 mm over any 3-meter length. This ensures smooth, automated feeding into tube-bundle assembly lines, prevents damage to tubesheet holes caused by forced insertion, and guarantees precise alignment of baffle holes across the entire length of the tube bundle.

TP316/316L SeamlessCold Drawing Tube
TP316/316L SeamlessCold Drawing Tube
Multi-Roll Straightening Line
Multi-Roll Straightening Line

 

We offer ASME SA213 TP316/TP316L dual-certified seamless tubes, available in both cold-worked and hot-worked conditions. Each steel tube undergoes specialized internal surface finishing, followed by 100% visual inspection and eddy current testing, to ensure the inner surface is entirely free from defects such as drawing scratches, burrs, folds, pinholes, or porosity. Furthermore, we offer U-bent tubes with controlled bend radii, which are subjected to solution annealing after the bending process-ideal for use in U-tube heat exchanger bundles.

 

ASME SA213 TP316/316L Seamless Stainless Steel Tube
ASME SA213 TP316/316L Seamless Stainless Steel Tube
ASME SA213 TP316/316L Heat Exchanger Tube
ASME SA213 TP316/316L Heat Exchanger Tube
TP316/316L Stainless Steel U-Tube
TP316/316L Stainless Steel U-Tube

 

ASME SA213 TP316/316L Seamless Tube Specification Overview

Item Detail
ASME / ASTM SA213 / SA213M (latest: SA213-24 / SA213M-24)
Title Specification for Seamless Ferritic and Austenitic Cr-Ni Stainless Steel Boiler, Superheater, and Heat Exchanger Tubes
Product form Seamless tube (hot-finished or cold-finished)
Size range ID ≥ ⅛″ (3.2 mm); OD ≤ 5″ (127 mm)
Wall thickness 0.015″ – 0.500″ (0.4 – 12.7 mm)
Length Specific (cut to length ±⅛″) or random (16′–40′)
Condition Solution heat treated (mandatory)
Governing committee ASTM A01.10 / ASME BPE Code Section II, Part D

 

Heat Treatment

Parameter TP316 TP316L
Type Solution treatment Solution treatment
Temperature, min 1 900 °F (1 040 °C) 1 900 °F (1 040 °C)
Cooling Water or other rapid cool Water or other rapid cool
ASTM grain size - (not applicable) -
Post-weld annealing Recommended (1 900–2 100 °F + rapid cool) Mandatory for thick sections

 

ASTM A213 Tube Dimensional Tolerances

Outside Diameter & Wall Thickness (per ASTM A1016 / SA213 )

OD Range OD Tolerance (±) Wall Tolerance
< 1.00″ (< 25.4 mm) ± 0.004″ (± 0.10 mm) ± 10 % of wall
1.00″ – 1.50″ (25.4 – 38.1 mm) ± 0.006″ (± 0.15 mm) ± 10 % of wall
1.50″ – 2.00″ (38.1 – 50.8 mm) ± 0.008″ (± 0.20 mm) ± 10 % of wall
2.00″ – 2.50″ (50.8 – 63.5 mm) ± 0.010″ (± 0.25 mm) ± 10 % of wall
2.50″ – 3.00″ (63.5 – 76.2 mm) ± 0.012″ (± 0.30 mm) ± 10 % of wall
3.00″ – 4.00″ (76.2 – 101.6 mm) ± 0.015″ (± 0.38 mm) ± 10 % of wall
4.00″ – 5.00″ (101.6 – 127.0 mm) ± 0.015″ over / 0.025″ under ± 10 % of wall

Cut Length Tolerance

Length Tolerance
≤ 16′ (4.9 m) +⅛″ / −0 (0 – 3.2 mm)
> 16′ (4.9 m) +⅜″ / −0 (0 – 9.5 mm)

 

 Standard Sizes & Weights 

OD (in / mm) BWG Wall (in / mm) ID (in / mm) Weight (lb/ft / kg/m)
⅜″ / 9.53 22 0.035″ / 0.89 0.260″ / 6.60 0.22 / 0.33
½″ / 12.70 18 0.049″ / 1.24 0.402″ / 10.21 0.36 / 0.54
⅝″ / 15.88 16 0.065″ / 1.65 0.428″ / 10.87 0.50 / 0.74
¾″ / 19.05 14 0.083″ / 2.11 0.534″ / 13.56 0.72 / 1.07
1″ / 25.40 12 0.109″ / 2.77 0.782″ / 19.86 1.05 / 1.56
1¼″ / 31.75 12 0.109″ / 2.77 0.932″ / 23.67 1.33 / 1.98
1½″ / 38.10 12 0.109″ / 2.77 1.082″ / 27.48 1.60 / 2.39
2″ / 50.80 12 0.109″ / 2.77 1.382″ / 35.10 2.15 / 3.20
2½″ / 63.50 12 0.109″ / 2.77 1.682″ / 42.72 2.70 / 4.03
3″ / 76.20 12 0.109″ / 2.77 1.982″ / 50.34 3.25 / 4.85
4″ / 101.60 12 0.109″ / 2.77 2.582″ / 65.58 4.35 / 6.48

 

Send your required OD, wall thickness, length, quantity, U-bend or straight configuration and inspection scope. Our technical sales team will confirm dual grade compliance, share hardness and straightness test reference data, and return a detailed quotation with full certificate scope and lead time within 24 working hours.

Request a Quote Now

ASME SA213 TP316/316L  Stainless Steel Tube HS Code

Item

Description

Product Name

ASME SA213 TP316/316L Seamless Stainless Steel Tube

Material

TP316 / TP316L

UNS Number

S31600 / S31603

HS Code (6 Digits)

7304.41

HS Code Description

Other tubes, pipes and hollow profiles, seamless, of stainless steel, cold-drawn or cold-rolled (cold-reduced)

Quality Inspection

Every production batch of products must pass all tests required by the ASME SA213 standard, supplemented by our own rigorous, high-standard quality control measures. These include: spectroscopic chemical composition analysis, room-temperature tensile testing, hardness testing (maximum 84 HRB), flattening and flaring ductility tests, 100% eddy current non-destructive testing (NDT), hydrostatic testing, and positive material identification (PMI). Additional testing protocols encompass ultrasonic testing, intergranular corrosion testing in accordance with ASTM A262, and the determination of ferrite content.

316/316L pipe PMI
316/316L pipe PMI
Dimensional inspection
Dimensional inspection
Dimensional inspection
Dimensional inspection
Hydrostatic testing
Hydrostatic testing
 
Eddy current testing
Eddy current testing
Hardness testing
Hardness testing

Lead time and packaging:

standard stock sizes ship within 10–16 working days; custom dimensions and special inspection packages require 18–28 working days. Each tube is fitted with plastic end caps, protected by anti-rust wrapping and packed in fumigated wooden crates with tube separators to prevent surface and end damage during ocean freight. All bundles are marked with grade, heat number, ASME SA213, dimensions and inspection batch for full receiving traceability.

Lead Time And Packaging

Hot Tags: asme sa213 tp316/316l seamless stainless steel tube, China asme sa213 tp316/316l seamless stainless steel tube manufacturers, suppliers, factory

Send Inquiry