1.4462 duplex stainless steel equivalent

Jul 17, 2025

Leave a message

What is 1.4462 duplex stainless steel equivalent to?

1.4462 duplex stainless steel, also known as X2CrNiMoN22-5-3, is a widely used grade for its high strength and excellent corrosion resistance, especially in chloride-rich environments.

Material Type: Duplex stainless steel (ferritic-austenitic)

Typical Applications: Pressure vessels, desalination plants, offshore platforms, heat exchangers, pipelines.

Standard Equivalent Grade
UNS (ASTM/ASME) S31803 / S32205
AISI / SAE –
JIS (Japan) SUS329J3L
GB (China) 022Cr22Ni5Mo3N
GOST  08Х22Н5М3Л

 

S31803 vs S32205 vs 1.4462: Are They the Same?

While UNS S31803 and 1.4462 are often considered equivalent, UNS S32205 has a slightly optimized composition with improved corrosion resistance. Many manufacturers have shifted from S31803 to S32205 to meet stricter service conditions.

Tip for buyers: If sourcing from Europe, you may receive material labeled as 1.4462 but certified to meet S32205 performance.

 

Chemical Composition of 1.4462

This chemical balance provides PREN (Pitting Resistance Equivalent Number) of ~34–35, making it suitable for chloride-containing environments like seawater or chemical brine.

Element Content (%)
Chromium (Cr) 21.0–23.0
Nickel (Ni) 4.5–6.5
Molybdenum (Mo) 2.5–3.5
Nitrogen (N) 0.14–0.20
Manganese (Mn) ≤ 2.0
Carbon (C) ≤ 0.03

 

Mechanical Properties of 1.4462 Duplex Stainless Steel

Property Typical Value
Yield Strength (Rp0.2) ≥ 450 MPa
Tensile Strength (Rm) 620–880 MPa
Elongation ≥ 25%
PREN (Pitting Resistance) 34–38 (excellent)
Service Temperature -50°C to +250°C

 

What is the density of 1.4462 steel?

Grade : X2CrNiMoN22-5-3
Number: 1.4462
Classification: Austenitic-ferritic stainless steel
Density: 7.8 g/cm ³
Standard:
EN 10088-2: 2005 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
EN 10088-3: 2005 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes

 

1.4462 Stainless Steel Machinability & Weldability

Moderate machinability-requires slower cutting speeds and rigid tools compared to austenitic grades.
Good weldability with proper filler metals (e.g., ER2209 or E2209), avoiding excessive heat input to prevent phase imbalance.

Post-weld pickling and passivation recommended for optimal corrosion resistance.

 

When selecting 1.4462 or its equivalent, consider the operating environment, required certifications, and corrosion resistance levels. Whether you're sourcing from the EU, the US, or Asia, understanding equivalencies ensures quality and compliance.

At GNEE, we supply certified 1.4462 duplex stainless steel pipes, tubes, and sheets with full EN 10204 3.1/3.2 MTC, supporting global equivalents such as S32205. We help clients identify the right grade per project specs and local standards.

Contact now

 

1.4462 Duplex Stainless Steel in stock

Product Form Size Range (Typical) Standards
Seamless Pipe OD 6 – 610 mm, WT 1 – 50 mm ASTM A790, EN 10216-5, DIN 17456
Welded Pipe OD 15 – 1219 mm, WT 1 – 40 mm ASTM A928, EN 10217-7
Seamless Tube OD 6 – 114 mm, WT 0.5 – 6 mm ASTM A789, EN 10216-5
Welded Tube OD 12 – 254 mm, WT 0.5 – 5 mm ASTM A249, EN 10217-7
Plate / Sheet Thickness 1.0 – 50 mm ASTM A240, EN 10088-2
Coil / Strip Thickness 0.3 – 6.0 mm, Width up to 1500 mm ASTM A240, EN 10088-2
Round Bar / Rod Dia. 6 – 300 mm ASTM A479, EN 10088-3

 

Surface Finish: 2B, No.1, pickled, polished, or brushed available on request.

Delivery Condition: Solution annealed, pickled, and passivated.

Certifications: EN 10204 3.1 / 3.2, PED/AD 2000, NORSOK (if applicable).

1.4462 Stainless Steel Plate / Sheet
1.4462 Stainless Steel Plate / Sheet
1.4462 Duplex Stainless Steel Seamless Pipe
1.4462 Duplex Stainless Steel Seamless Pipe

Send Inquiry