15-5PH Stainless Steel Bar, Plate & Sheet for customer
Mar 16, 2026
Leave a message
| Standard | AMS 5659, AMS 5823, AMS 5862, ASTM A564 / A564M, ASTM A693 |
|---|---|
| Grade | 0Cr15Ni5Cu4Nb, 1.4545, S15500 |
| Length | 1000 mm-6000 mm (39.37-236.22 in), Customized |
| Diameter | Bar: 6 mm-300 mm (0.24-12 in), Customized |
| Thinckness | Customized, Plate: 6 mm-100 mm (0.24-3.94 in), Sheet: 0.5 mm-6 mm (0.02-0.24 in) |
| Full Width | Customized, Sheet & Plate: 1000 mm-2000 mm (39.37-78.74 in) |
| Surface Finish | 2B, 2D, BA, Coated, etc., Ground, Mill, No.1, No.4, Peeled, Polished, Turned |
| Form | 15-5PH Forged bar, 15-5PH plate, 15-5PH Polished plate, 15-5PH sheet, 15-5PH Tempered sheet, Coil, Cold Drawn Bar, Cold-Rolled Plate, etc., Flat Bar, Hot-rolled sheet, Rectangular bar, Rod, Round Bar, Square Bar, Strip |
Chemical Compositions
| Chromium (Cr) | Nickel (Ni) | Copper (Cu) | Manganese (Mn) | Silicon (Si) | Carbon (C) | Phosphorus (P) | Sulfur (S) | Nitrogen (N) |
|---|
| 14.0 – 15.5 | 3.5 – 5.5 | 2.5 – 4.5 | 1.0 max | 1.0 max | 0.07 max | 0.04 max | 0.03 max | 0.10 max |
Mechanical Properties
| Properties | Metric Unit | Imperial Unit |
|---|
| Tensile Strength | 1000-1170 MPa | 145-170 ksi |
| Yield Strength | ≥ 1000 MPa | ≥ 145 ksi |
| Vickers Hardness | 360 HV (typical) | 360 HV (typical) |
| Brinell Hardness | 350 HB (typical) | 350 HB (typical) |
| Rockwell Hardness | 35 HRC (typical) | 35 HRC (typical) |
| Elongation | ≥ 10% | ≥ 10% |
| Elastic Modulus | 200 GPa | 29.0 x 10³ ksi |
Send Inquiry