201 Stainless Steel Sheet
Mar 10, 2026
Leave a message
| Standard |
ASTM A240, EN 10088-2, GB/T 3280 |
|---|---|
| Grade |
1.4372, SUS201, X12CrMnNiN17-7-5, Z12CMN17-07Az |
| Length |
2000 mm-6000 mm (78.74-236.22 in), Customized |
| Full Width |
1000 mm-2000 mm (39.37-78.74 in), Customized |
| Thickness |
0.3 mm-6 mm (0.012-0.24 in), Customized |
| Surface Finish |
2B, 8K, BA, etc., HL, No.1, No.4 |
| Technique |
Cold Drawn, Cold Rolled, Hot Rolled |
| Form |
Coil, Cold Rolled Sheet, Embossed Sheets, etc., Flat Plate & Sheet, Hot Rolled Sheet, Perforated Sheets, Plate, Polished Sheets, Strip, Textured Sheets |
Chemical Compositions
| Element | Carbon (C) | Manganese (Mn) | Silicon (Si) | Phosphorus (P) | Sulfur (S) | Chromium (Cr) | Nickel (Ni) | Nitrogen (N) |
|---|
| Composition (%) | 0.15 max | 5.5-7.5 | 1.0 max | 0.06 max | 0.03 max | 16.0-18.0 | 3.5-5.5 | 0.25 max |
Mechanical Properties
| Properties | Metric Unit | Imperial Unit |
|---|
| Tensile Strength | 655 – 860 MPa | 95 – 125 ksi |
| Yield Strength | 450 MPa | 65 ksi |
| Vickers Hardness | 230 – 270 HV | 230 – 270 HV |
| Brinell Hardness | 200 – 250 HB | 200 – 250 HB |
| Rockwell Hardness | 50 – 56 HRC | 50 – 56 HRC |
| Elongation | 20% | 20% |
| Elastic Modulus | 200 GPa | 29 x 10^6 psi |
Send Inquiry