301LN vs 304 Austenitic Stainless Steels: High-Strength Cold-Worked Parts
Dec 15, 2025
Leave a message
What are their core compositions and performance traits?
301LN (UNS S30153) contains 16-18% Cr, 6-8% Ni, 0.10-0.20% N, and low carbon, with nitrogen enhancing strength and austenite stability during cold forming. It reaches a tensile strength of 1200MPa after severe cold working.304 (UNS S30400) has 18-20% Cr, 8-10.5% Ni, and ≤0.08% C, delivering a tensile strength of ~515MPa in the annealed state with balanced formability and corrosion resistance.301LN is non-magnetic in the annealed state but becomes magnetic after cold working, while 304 remains non-magnetic even after moderate forming.
How does 301LN's cold working capability outperform 304?
301LN's nitrogen addition accelerates work hardening-cold rolling to 50% reduction doubles its strength without heat treatment, making it ideal for high-strength springs and snap rings.304 work-hardens more slowly and requires intermediate annealing for severe forming, increasing production time and costs.301LN retains ductility even at high cold-worked strength, preventing cracking during bending or stamping processes.
How do their corrosion resistances compare in service environments?
301LN's nitrogen addition improves pitting resistance compared to standard 301, matching 304's performance in dry and mildly humid indoor environments.304 offers better overall corrosion resistance, tolerating outdoor atmospheric exposure and mild chemical contact, while 301LN may rust in coastal or high-chloride settings.Neither grade is recommended for marine applications-upgrade to 316 or duplex grades for saltwater exposure.
What are the typical application areas for these two grades?
301LN is used for high-strength springs, battery contacts, snap fasteners, and aircraft structural components that require lightweight and high load capacity.It is also specified for flexible tubing and expansion joints, where its cold-worked strength and elasticity are critical.304 is the default choice for general-purpose parts: kitchenware, architectural trim, chemical tanks, and food processing equipment.
What are the cost and fabrication trade-offs between 301LN and 304?
301LN is 10-15% more expensive than 304 due to nitrogen alloying and tighter production controls, making it cost-effective only for high-strength applications.301LN requires precise cold working process control to avoid over-hardening and embrittlement, while 304's forgiving formability suits simple fabrication.Both grades have good weldability, but 301LN's welds lose cold-worked strength and require re-forming to restore performance.
Send Inquiry









