304 (1.4301) vs. 904L (1.4539): Industrial Grade vs. Super Austenitic Stainless Steel

Dec 18, 2025

Leave a message

Austenitic, Ferritic & Duplex Stainless Steel Grades: Equivalent Guide1.4541 vs 1.4571 stainless steel: High temperature resistanceSUS316Ti Stainless Steel Knowledge

304 (1.4301) - The Workhorse

Type: Standard Austenitic.

Composition: ~18% Chromium, ~8% Nickel (18/8).

Pros: Excellent formability (deep drawing), widely used, cost-effective, good general corrosion resistance (food grade, freshwater).

Cons: Vulnerable to chloride pitting and aggressive chemicals; can suffer intergranular corrosion if welded improperly (hence 304L for low carbon).

Uses: Kitchen sinks, cookware, cutlery, general industrial parts, food processing.

904L (1.4539) - The Specialist

Type: Super Austenitic (High Molybdenum).

Composition: Higher Cr, Ni, plus Molybdenum (Mo) and Copper (Cu).

Pros: Exceptional resistance to pitting, crevice corrosion, stress corrosion cracking, and strong acids (sulfuric, phosphoric); superior to 304/316 in harsh conditions.

Cons: More expensive, slightly harder, less ductile than 304, so harder to form.

Uses: Chemical processing, marine environments, high-chloride areas, flue gas desulfurization, oil & gas.

Key Takeaway

Choose 304 for everyday, general use where cost and formability matter. Choose 904L for severe corrosive environments, strong acids, and high-chloride conditions where superior corrosion resistance justifies the higher cost.

 

Send Inquiry