409 Stainless Steel Coil, Sheet, Plate, Pipe & Tube Supplier

Mar 11, 2026

Leave a message

What is 409/UNS S40900/EN 1.4512 stainless steel?

409/UNS S40900/EN 1.4512 ferritic stainless steel contains Cr 10.5-11.7% and Ti 6xC~0.75%. The addition of trace titanium provides good weldability and resistance to intergranular corrosion, maintaining structural integrity and resistance to oxidation scaling under continuous 675°C and intermittent 815°C environments. Compared with carbon steel, it significantly increases service life, while its cost is substantially lower than that of 304 austenitic stainless steel, making it an ideal choice for automotive exhaust systems (mufflers, tailpipes), agricultural machinery, and heat exchangers.

 

409 UNS S40900 Chemical Composition (%)

Element 409 (UNS S40900) 409L (UNS S40910/20) 409Ni (UNS S40975)
Carbon (C) 0.08 max 0.03 max 0.03 max
Chromium (Cr) 10.50 – 11.75 10.50 – 11.75 10.50 – 11.75
Nickel (Ni) 0.50 max 0.50 max 0.50 – 1.00
Titanium (Ti) 6x(C) to 0.75 max 6x(C+N) to 0.75 max 6x(C+N) to 0.75 max
Manganese (Mn) 1.00 max 1.00 max 1.00 max
Silicon (Si) 1.00 max 1.00 max 1.00 max
Phosphorus (P) 0.045 max 0.040 max 0.040 max
Sulfur (S) 0.030 max 0.020 max 0.020 max

 

409 UNS S40900 Mechanical Properties (At Room Temperature)

Grade 409 provides moderate strength and good ductility.

Property Value (Metric) Value (Imperial)
Tensile Strength (UTS) 380 - 560 MPa 55 - 81 ksi
Yield Strength (0.2% Offset) 170 - 310 MPa 25 - 45 ksi
Elongation (in 50mm) 20% min 20% min
Hardness (Rockwell B) 75 HRB max 75 HRB max
Hardness (Brinell) 149 HB max 149 HB max

 

409 Stainless Steel Physical Properties

These properties remain relatively consistent across the 409 sub-grades.

Property Value
Density 7.80 g/cm³ (0.28 lb/in³)
Melting Point 1430 – 1510°C (2600 – 2750°F)
Modulus of Elasticity 200 GPa (29 x 10⁶ psi)
Thermal Conductivity (at 100°C) 25.8 W/m·K
Electrical Resistivity 600 nΩ·m
Magnetic Permeability Magnetic (Ferritic Structure)

 

 409 Stainless Steel Equivalent Grades

USA (UNS) USA (AISI/ASTM) European (EN/DIN) W.Nr. Japanese (JIS) Chinese (GB/T)
S40900 409 X2CrTi12 1.4512 SUH409 06Cr11Ti
S40910 409L X2CrTi12 1.4512 SUS409L 022Cr11Ti

 

409 Stainless Steel Specification

Standard

ASTM A240 / A240M, ASTM A268 / A268M

Grade

022Cr11Ti, 1.4512, SUS409L

Thickness

Coil: 0.3 mm (0.012 in) to 6.0 mm (0.236 in), Customized, Plate: 6.0 mm (0.236 in) to 50.0 mm (1.968 in), Sheet: 0.3 mm (0.012 in) to 6.0 mm (0.236 in)

Full Width

Customized, Plate: 1500 mm (59.06 in) to 2000 mm (78.74 in), Sheet & Coil: 1000 mm (39.37 in) to 1500 mm (59.06 in)

Length

Customized, Pipe: 6000 mm (236.22 in), Plate: 6000 mm (236.22 in) to 12000 mm (472.44 in), Sheet: 2000 mm (78.74 in) to 6000 mm (236.22 in)

ID

Coil: 508 mm (20 in) to 610 mm (24 in), Customized

OD

6 mm (0.236 in) to 610 mm (24.02 in), Customized

Surface Finish

2B, BA, HL, Mirror, No. 1, No.4, Pickled, Polished

Form

Clad Plate, Flat Plate, Flat Sheets, Perforated Sheets, Round Pipe, Seamless Pipe, Slit Coil, Standard Coil, Welded Pipe

 

Applications:

Automotive: Exhaust manifolds, catalytic converter shells, mufflers, tailpipes.
Industrial: Furnace liners, heat exchanger tubing, agricultural equipment (spreader components).
Power Generation: Transformer cases, silencers.

 

If you are willing, please let me know:
the shapes and dimensions you require (such as plate thickness, pipe diameter, etc.),
as well as the specific project or application scenario.
I can then recommend suitable specifications or dimensional standards for you.

Contact now

 

409/UNS S40900/EN 1.4512 Stainless Steel Plate Supplier

GNEE Stainless Steel stably supplies 409/409L/409Ni stainless steel coils, sheets, plates, heavy plates, seamless pipes, and welded tubes conforming to ASTM A240/A268, EN 10088, and JIS G4305 standards. Our supplied coils and sheets cover thicknesses from 0.3 to 12.0 mm and widths from 1000 to 1500 mm; steel pipes cover outer diameters from Φ6 to 610 mm and wall thicknesses from 0.5 to 20 mm, supporting cold-rolled 2B/BA and hot-rolled No.1 surface finishes for delivery. GNEE provides precise slitting, leveling, waterjet/laser cutting, pipe bending, and wire drawing/polishing services, with processing tolerances controlled within ±0.05 mm. 

info-510-370
ASTM A268 TP409 Stainless Steel Pipe
info-655-470
409 Stainless Steel Pipe PMI
info-638-585
409L Stainless Steel Plate (3.0 x 1255 x 3000 mm)
409L NO.1 Stainless Steel  Plate
409L NO.1 Stainless Steel  Plate
409L Stainless Steel Hot-Rolled Coils
409L Stainless Steel Hot-Rolled Coils
409L Stainless Steel Hot-Rolled Plate
409L Stainless Steel Hot-Rolled Plate

Every shipment comes with an EN 10204 3.1 Mill Test Certificate and utilizes moisture-proof PE film with fumigated wooden crate secure packaging to guarantee zero-damage global sea freight delivery.

EN 10204 3.1 Mill Test

FAQ

Q: What are the differences between 409, 409L, and 409Ni?
A:409 (UNS S40900): Standard carbon content (≤ 0.08%); primarily used for general heat-resistant and structural applications.
409L (UNS S40910/S40920): Low-carbon version (typically ≤ 0.03%). It offers superior weldability and formability and is currently the most common specification for automotive exhaust systems.
409Ni (UNS S40975): Contains a small addition of nickel (Ni). This improves low-temperature impact toughness and weld zone strength; it is often used for thicker plate applications.

 

Q: Does 409 stainless steel rust?
A: Yes, but primarily surface rust. The chromium content in 409 is at the lower end of the stainless steel range. While it resists atmospheric and exhaust gas corrosion, a brown oxide layer (resembling rust) tends to form on its surface.

 

Q: What is the maximum operating temperature for 409?
A: 409 offers good oxidation resistance:
Continuous service: Up to 675°C.
Intermittent service: Up to 815°C.
Exceeding these temperatures accelerates oxide scale spalling and causes a rapid decline in material strength.

 

Q: Why is 409 preferred over 304 for automotive exhaust systems?
Low thermal expansion coefficient: Ferritic steels (409) have a lower thermal expansion coefficient than austenitic steels (304), making them less prone to thermal fatigue during repeated heating and cooling cycles.
Good thermal conductivity: 409 dissipates heat faster than 304.
Cost: 409 contains little to no nickel, making it significantly cheaper than 304; its corrosion resistance is sufficient for components such as mufflers and exhaust pipes.

Send Inquiry