ASTM A213 TP309S Stainless Steel Seamless Pipe — High-Temperature Grade

Jan 26, 2026

Leave a message

What is ASTM A213 TP309S?

ASTM A213 TP309S (UNS S30908) is a low‑carbon high‑chromium‑nickel austenitic heat‑resistant seamless steel tube specified by ASTM A213. With carbon content ≤0.08%, it reduces the risk of intergranular corrosion after welding. It features excellent high‑temperature oxidation resistance, carburization resistance and sulfidation resistance. Its continuous oxidation service temperature is approximately 980 °C, with intermittent service up to 1093 °C. It delivers inferior high‑temperature performance compared with TP310S, yet offers better cost‑effectiveness. It is widely used for boiler superheater and reheater tubes, industrial furnace tubes, petrochemical cracking furnaces, flue‑gas heat‑exchange components for waste incineration plants, and radiant tubes for heat‑treatment furnaces. It also serves as transition parts for dissimilar‑metal welding between carbon steel and stainless steel. It is not suitable for high‑chloride service conditions. Long‑term exposure at 650‑900 °C shall be avoided to prevent sigma‑phase embrittlement.

 

Equivalent Grades (Horizontal) of ASTM A213 TP309S

Standard Grade
UNS S30908
JIS SUS309S
GB 06Cr23Ni13
EN X5CrNi23-12 (W.Nr. 1.4833)

 

Chemical Composition (wt%, Horizontal) of ASTM A213 TP309S

Element 309 309S 309H
Cr 22.0–24.0 22.0–24.0 22.0–24.0
Ni 12.0–15.0 12.0–15.0 12.0–15.0
C ≤0.20 ≤0.08 0.04–0.10
Mn ≤2.00 ≤2.00 ≤2.00
Si ≤0.75 ≤0.75 ≤0.75
P ≤0.045 ≤0.045 ≤0.045
S ≤0.030 ≤0.030 ≤0.030

 

Mechanical Propertiesof ASTM A213 TP309S Stainless Steel

(Room Temperature, Solution Annealed, Minimum values per ASTM A213) 
Property Value
Tensile Strength ≥515 MPa
Yield Strength (0.2% offset) ≥205 MPa
Elongation (A50) ≥35 %
Max Brinell Hardness ≤192 HB

Note: It maintains fair creep strength at elevated temperatures. Long‑term holding at 650‑900 °C should be avoided to prevent sigma‑phase embrittlement.

 

Physical Properties (20 °C, typical values) of ASTM A213 TP309S Stainless Steel

Property Value
Density 7.89 g/cm³
Melting Range 1480‑1530 °C
Coefficient of Thermal Expansion (20‑100 °C) 15.8 ×10⁻⁶ /°C
Thermal Conductivity 14.2 W/(m·K)
Specific Heat Capacity 490 J/(kg·K)
Electrical Resistivity 0.78 μΩ·m
Elastic Modulus 193 GPa
Magnetic Response Non‑magnetic (solution annealed); slight magnetism after cold working

High‑temperature note:Continuous oxidation service ~980 °C, intermittent up to 1093 °C;performance lower than 310S but cost‑effective.

 

TP309S vs TP310S (Horizontal) of ASTM A213 TP309S Stainless Steel

Item 309S 310S
Cr 22.00–24.00% 24.00–26.00%
High-temp service limit (oxidation ref.) About 1050 °C About 1150 °C
Oxidation resistance Excellent Superior
Cost Lower Higher
 

Application of ASTM A213 TP309S Stainless Steel

1.Boiler & heat‑exchanger tubes:

Furnace tubes, superheater & reheater tubes for industrial furnaces, waste‑heat recovery boilers, high‑temperature heat exchangers.

2.Petro‑chemical industry:

Cracking furnace tubes, reformer equipment; good resistance to carburization & sulfidation at high temperature.

3.Waste incineration plant:

Combustion zone tubes, flue‑gas heat‑exchange parts, resists high‑temperature flue gas corrosion.

4.Industrial heat treatment equipment:

Radiant tubes, furnace component tubes for carburizing & annealing furnaces.

5.Alloy transition service:

Also widely used as dissimilar metal welding transition material between carbon steel and stainless steel.

Chemical pipelines

Chemical pipelines

thermal boiler pipelines

thermal boiler pipelines

 environmental desulfurization pipelines

 environmental desulfurization pipelines

If you need specific information, tell me:

Do you need dimensions, wall thickness, or pressure ratings?

Are you comparing it to a different grade like TP310S or TP309H?

Contact now

ASTM A213 TP309S Stainless Steel Suppliers

GNEE supplies ASTM A213 TP309S (UNS S30908) low‑carbon high‑chromium‑nickel heat‑resistant seamless steel tubes, along with a full range of supporting products including plates, coils, bars, flanges and pipe fittings. Products comply with international standards such as ASTM A213 / ASME SA213 and EN 10216‑5. Custom processing services including cut‑to‑length, beveling, tube bending and special surface finishing are available. Seaworthy export packing adopts VCI anti‑rust paper, tube end caps and fumigated wooden cases. Our products are exported to more than 60 countries across the globe. If you are looking to purchase high‑quality ASTM A213 TP309S stainless steel, GNEE can provide you with professional procurement solutions.

ASTM A213 TP309S Stainless Steel bar

ASTM A213 TP309S Stainless Steel bar

ASTM A213 TP309S Stainless Steel Coils

ASTM A213 TP309S Stainless Steel Coils

ASTM A213 TP309S Stainless Steel Plates

ASTM A213 TP309S Stainless Steel Plates

Please contact us immediately for detailed chemical composition information or to request free samples. We offer highly competitive prices and excellent service. Email: info@gneestainless.com

Contact now

FAQ

1.What is the difference between TP309S and TP310S?

EN: TP310S has higher Cr and Ni content with better high‑temperature performance and higher cost. TP309S shows slightly lower high‑temperature resistance but delivers better cost‑effectiveness for moderate high‑temperature conditions.

 

2.Is TP309S magnetic?

EN: Non‑magnetic in solution‑annealed condition. Slight magnetism may appear after cold working, which is normal for austenitic stainless steel. 

 

3.What is the max service temperature of TP309S? Any long‑term service notes?

Continuous oxidation service ~980 °C, intermittent up to 1093 °C. Avoid long‑term holding between 650‑900 °C, which causes sigma‑phase embrittlement and reduces toughness.

 

4.Can TP309S work in chloride‑containing environments?

Not suitable. It is heat‑resistant grade for high‑temperature flue gas and oxidizing atmosphere, not for high‑chloride corrosion service.

 

 

 

Send Inquiry