ASTM A240 Grade 310S Hot Rolled Stainless Steel Plate Softened And Descaled

General Properties

Alloy 310 (UNS S31000) is an austenitic stainless steel developed for use in high temperature corrosion resistant applications. The alloy resists oxidation up to 2010oF (1100oC) under mildly cyclic conditions.

Because of its high chromium and moderate nickel content, Alloy 310 is resistant to sulfidation and can also be used in moderately carburizing atmospheres.

The more severe carburizing atmospheres of thermal process equipment usually require nickel alloys such as 330 (UNS N08330). Alloy 310 can be utilized in slightly oxidizing, nitriding, cementing and thermal cycling applications, albeit, the maximum service temperature must be reduced. Alloy 310 also finds usage in cryogenic applications with low magnetic permeability and toughness down to -450oF (-268oC). When heated between 1202 – 1742oF (650 – 950oC) the alloy is subject to sigma phase precipitation. A solution annealing treatment at 2012 – 2102oF (1100 – 1150oC) will restore a degree of toughness.

310S (UNS S31008) is the low carbon version of the alloy. It is utilized for ease of fabrication. 310H (UNS S31009) is a high carbon modification developed for enhanced creep resistance. In most instances the grain size and carbon content of the plate can meet both the 310S and 310H requirements.

Alloy 310 can be easily welded and processed by standard shop fabrication practices.

Applications

Cryogenic Components

Food Processing

Furnaces – burners, doors, fans, piping and recuperators

Fluidized Bed Furnaces – coal combustors, grids, piping, wind boxes

Ore Processing/Steel Plants – smelter and steel melting equipment, continuous casting equipment

Petroleum Refining – catalytic recovery systems, flares, recuperators, tube hangers

Power Generation – coal gasifier internals, pulverized coal burners, tube hangers

Sintering/Cement Plants – burners, burner shields, feeding and discharging systems, wind boxes

Thermal Processing – annealing covers and boxes, burner grids, doors, fans, muffles and retorts, recuperators, walking beams

Standards

ASTM……..A 240
ASME……..SA 240
AMS……….5521