Knowledge about Stainless Steel 439
Dec 11, 2025
Leave a message
Stainless Steel 439 is a titanium-stabilized ferritic stainless steel, an improved version of 430. It contains 17–19% chromium and titanium (0.10–0.60%) to prevent intergranular corrosion, making it suitable for welded or high-temperature applications where 430 fails.

Chemical Composition (Key, % ASTM A240) C: ≤0.12; Cr: 17.00–19.00; Ti: 0.10–0.60; Mn: ≤1.00
Mechanical Properties (Annealed) Tensile Strength: ≥450 MPa; Yield Strength: ≥205 MPa; Elongation: ≥20%; Hardness: ≤183 HB
Performance & Uses Advantages: Resists intergranular corrosion, good formability, stable at high temps. Applications: Automotive exhaust systems, heat exchangers, welded food processing equipment, furnace parts.
Equivalent Grades: EN 1.4510, JIS SUS439, DIN X2CrTi18

5 Quick Q&As
1. How does titanium improve 439 compared to 430? 430 is prone to intergranular corrosion when welded or heated to 450–850°C, as carbon reacts with chromium to form chromium carbides (depleting Cr at grain boundaries). 439 adds titanium (0.10–0.60%), which has a stronger affinity for carbon-forming titanium carbides instead. This keeps chromium evenly distributed, preventing sensitization and intergranular corrosion. Titanium also improves high-temperature stability, allowing 439 to withstand 800°C (vs. 815°C for 430, but with better stability). For welded exhaust systems, this means 439 welds don't corrode, unlike 430.
2. Why is 439 used for automotive exhausts instead of 409? 439 has higher chromium (17–19% vs. 10.5–11.75% for 409), providing better corrosion resistance to exhaust gases and road salt. This makes it suitable for luxury or heavy-duty vehicles where exhaust life is a priority (e.g., trucks, premium cars). 409 is cheaper but less corrosion-resistant, ideal for economy cars. 439 also has better formability than 409, allowing it to be shaped into complex exhaust components like catalytic converter housings. Its titanium stabilization ensures welds remain corrosion-resistant, reducing exhaust leaks.
3. Can 439 be used in food processing equipment? Yes, 439 is suitable for welded food processing equipment (e.g., conveyor belts, storage tanks). Its titanium stabilization prevents intergranular corrosion in welded areas, which could contaminate food with rust. It resists mild food acids (e.g., dairy, fruit juices) and is easy to clean, meeting food safety standards (e.g., FDA). While 304 is more corrosion-resistant, 439 is cheaper and sufficient for non-chloride food applications. It is not suitable for pickling or high-salt food processing (e.g., cured meats), where 316 is needed.

4. What is the maximum service temperature for 439, and how does it compare to 430? 439's maximum continuous service temperature is 800°C, similar to 430's 815°C, but it retains better stability at these temps. The titanium in 439 prevents grain growth and intergranular corrosion, so it can be used in furnace parts or heat exchangers for longer periods without degrading. 430 may become brittle or corrode in welded areas at 750+°C, while 439 remains ductile and corrosion-resistant. For applications like heat exchanger tubes operating at 700°C, 439 has a longer service life than 430.
5. How does 439's cost and performance compare to 304? 439 is 10–20% cheaper than 304 because it lacks nickel (304 has 8–10.5% Ni). 304 offers better corrosion resistance (especially to chlorides) and ductility, making it suitable for marine and chemical use. 439 has similar atmospheric corrosion resistance to 304 but is less ductile and cannot withstand saltwater. 439's strength is comparable to 304, but it is not heat-treatable. For welded, low-corrosion applications (e.g., exhausts, indoor food equipment), 439 is a cost-effective alternative; for harsh environments, 304 is superior.
Send Inquiry






