Stainless Steel Grade 410 - Martensitic Structural Grade

 

Chemical Composition

SS 410 material chemical composition is listed in the following table based on cast analysis.

Datasheet 1, The table below shows AISI 410 stainless steel composition.

Type 410 Chemical Composition, %
ASTM / SAE	AISI (UNS)	C	Si, ≤	Mn, ≤	P, ≤	S, ≤	Cr	Ni, ≤
ASTM A276/A276M	410 (UNS S41000)	0.08-0.15	1.00	1.00	0.040	0.030	11.5-13.5	–
ASTM A580/A580M		0.15, ≤	1.00	1.00	0.04	0.03	11.5-13.5	–
ASTM A959
ASTM A479/A479M
ASTM A314
ASTM A240/A240M		0.08-0.15	1.00	1.00	0.04	0.03	11.5-13.5	0.75
ASTM A473		0.15, ≤
SAE J405		0.15, ≤

Notes:

ASTM A276/A276M: Standard Specification for Stainless Steel Bars and Shapes

ASTM A240/A240M: Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

ASTM A580/A580M: Stainless Steel Wire

ASTM A479/A479M: Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

ASTM A959: Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels

ASTM A473: Stainless Steel Forgings

ASTM A314: Standard Specification for Stainless Steel Billets and Bars for Forging

SAE J405: Chemical Composition of SAE Wrought Stainless Steels