What is 1.4571 Stainless Steel?

1.4571 stainless steel, commonly known as 316Ti or UNS S31635, is a titanium-stabilized version of the standard 316 molybdenum-alloyed austenitic stainless steel. The addition of titanium enhances resistance to intergranular corrosion after welding or exposure to high temperatures, combining the excellent corrosion resistance of 316 with the stabilization benefits of titanium. This makes it ideal for welded components in chemical, pharmaceutical, and high-temperature applications where post-weld heat treatment is impractical.

 

This stabilized molybdenum-alloyed grade is standardized under key international systems.

Standard	Equivalent Grade
EN (Europe)	1.4571
ASTM/AISI (USA)	316Ti, UNS S31635
JIS (Japan)	SUS316Ti
KS (Korea)	STS316Ti

Titanium is added to bind with carbon and prevent chromium depletion at grain boundaries, while molybdenum enhances pitting resistance.

Element	C	Si	Mn	P	S	Cr	Ni	Mo	Ti
Content (%)	≤ 0.08	≤ 1.0	≤ 2.0	≤ 0.045	≤ 0.03	16.5 - 18.5	10.5 - 13.5	2.0 - 2.5	≥ 5xC

It maintains the good mechanical properties of the 316 family with excellent corrosion resistance.

Property	Yield Strength (Rp0.2)	Tensile Strength (Rm)	Elongation (A)	Hardness (HB)
Typical Value	≥ 200 MPa	500 - 700 MPa	≥ 40%	≤ 215

 

Key Characteristics and Applications of 1.4571 / 316Ti

Intergranular Corrosion Resistance: Titanium prevents chromium carbide formation at grain boundaries during exposure to temperatures between 450-850°C, maintaining corrosion resistance in welded structures.

Enhanced Pitting Resistance: The molybdenum content (2-2.5%) provides superior resistance to chloride-induced pitting and crevice corrosion compared to non-molybdenum grades.

Good High-Temperature Performance: Suitable for intermittent service up to about 850°C and continuous service to around 750°C with good oxidation resistance.

 

Primary Applications:

Chemical & Petrochemical: Welded vessels, heat exchangers, and piping systems handling corrosive chemicals at elevated temperatures.

Pharmaceutical: Equipment that undergoes frequent heat sterilization and requires high purity.

Marine & Coastal: Components exposed to seawater or salt-laden atmospheres where welding is required.

Power Generation: Boiler components, superheater parts, and feedwater heaters.

 

What is the main advantage of using 316Ti (1.4571) over standard 316 (1.4401) for welded applications?
The primary advantage is its stabilization against sensitization during welding. Standard 316 can experience chromium carbide precipitation in the heat-affected zone during welding, potentially leading to intergranular corrosion. The titanium in 316Ti forms stable carbides, preventing chromium depletion and maintaining corrosion resistance without requiring post-weld heat treatment. This makes 316Ti the preferred choice for heavy welded sections and components that will operate in the sensitization temperature range.

 

Is 316Ti stainless steel suitable for high-chloride environments like seawater?
316Ti offers good resistance to chloride attack, significantly better than 304 grades, due to its molybdenum content. However, for continuous immersion in seawater or highly aggressive chloride environments at elevated temperatures, more highly alloyed materials like super duplex (2507) or super austenitic (904L, 6% Mo grades) may be recommended. 316Ti performs well in splash zones, coastal atmospheres, and mildly aggressive chloride conditions, especially in welded applications where its stabilization provides additional protection.

 

Looking for a Reliable Supplier of 1.4571 / 316Ti Stainless Steel?
GNEE Steel supplies high-quality 316Ti (1.4571) stainless steel in plate, sheet, pipe, tube, bar, and fitting forms, ideal for welded applications requiring enhanced corrosion resistance. We provide full material certification (EN 10204 3.1) and comprehensive processing services including cutting, bending, and welding. If you have any requirements, please feel free to contact us.