What is the difference between 1.4404 and 1.4401 stainless steel pipes?
When sourcing stainless steel pipes for industrial or commercial applications, buyers often encounter two similar material designations: EN 1.4401 and EN 1.4404. At first glance, these two austenitic stainless steels seem nearly identical - both are often referred to as 316-grade stainless steel. But what exactly is the difference, and which should you choose?
In this article, we explain the key distinctions between 1.4401 vs 1.4404 stainless steel pipes, covering chemical composition, corrosion resistance, weldability, and common applications - so you can make the right purchasing decision.
What is the difference between 1.4404 and 1.4401 stainless steel pipes?
The primary difference between EN 1.4404 (AISI 316L) and EN 1.4401 (AISI 316) stainless steel pipes lies in their carbon content. EN 1.4404 is a low-carbon grade (carbon content < 0.030%), whereas EN 1.4401 has a standard carbon level (carbon content < 0.070%). Thanks to its low carbon composition, 1.4404 prevents chromium carbide precipitation during welding, thereby eliminating the risk of intergranular corrosion in welded piping systems. Consequently, 1.4404 has largely superseded 1.4401 in applications such as industrial welded piping, food and pharmaceutical systems, and marine environments.
Which standard do 1.4401 and 1.4404 correspond to in AISI?
1.4401 ≈ AISI 316
1.4404 ≈ AISI 316L
EN 1.4404 vs EN 1.4401 chemical composition
Both grades belong to the molybdenum-bearing austenitic family (containing 2.0%–2.5% Molybdenum), granting superior chloride pitting corrosion resistance over 1.4301 (304). However, carbon and nickel limits differ slightly under EN 10088-3 / EN 10217-7 / EN 10216-5 standards:
| Element (wt%) | EN 1.4404 (AISI 316L) | EN 1.4401 (AISI 316) |
|---|---|---|
| Carbon (C) | ≤ 0.030% | ≤ 0.070% |
| Chromium (Cr) | 16.5–18.5% | 16.5–18.5% |
| Nickel (Ni) | 10.0–13.0% | 10.0–13.0% |
| Molybdenum (Mo) | 2.00–2.50% | 2.00–2.50% |
| Silicon (Si) | ≤ 1.00% | ≤ 1.00% |
| Manganese (Mn) | ≤ 2.00% | ≤ 2.00% |
| Phosphorus (P) | ≤ 0.045% | ≤ 0.045% |
| Sulfur (S) | ≤ 0.015% (Seamless Pipe) | ≤ 0.015% (Seamless Pipe) |
1.4404 VS. 1.4401 Stainless Steel Pipes:Weldability and Intergranular Corrosion
1.4401 (AISI 316): Without post-weld heat treatment, carbon combines with chromium at grain boundaries (forming Cr₂₃C₆), leading to chromium depletion and making the heat-affected zone (HAZ) susceptible to intergranular corrosion (i.e., "weld decay").
1.4404 (AISI 316L): The extremely low carbon content (≤0.030%) prevents carbide formation during welding. Piping can be welded on-site without post-weld annealing and put directly into service in highly corrosive media.
1.4404 VS. 1.4401 Stainless Steel Pipes:Temperature Performance
Tensile and Yield Strength: At room temperature, the tensile and yield strengths of 1.4401 are slightly higher than those of 1.4404 due to the strengthening effect of interstitial carbon atoms.
High-Temperature Limits: For pressure vessels operating above 425°C (800°F), 1.4401 (or the high-carbon variant 1.4401/316H) offers superior creep-rupture strength; conversely, the upper temperature limit for 1.4404 in pressure-bearing applications is typically restricted to 400°C.
Is 1.4404 more expensive than 1.4401?
Yes, slightly. The improved weldability and enhanced corrosion resistance justify the premium in many applications.1.4404 stainless steel pipe contains lower carbon content than 1.4401, making it more suitable for welding and reducing the risk of intergranular corrosion. For this reason, 1.4404 is often preferred in high-corrosion or hygienic environments.
Can I replace 1.4401 with 1.4404?
Generally yes - 1.4404 is considered an improved version of 1.4401. However, always verify design or standard requirements.
1.4404 VS. 1.4401: Which Grade Should You Order?
| Application Environment | Recommended Pipe Grade | Key Selection Reason |
|---|---|---|
| Welded Process Piping (Chemical / Pharmaceutical) | EN 1.4404 (316L) | Minimizes the risk of weld decay and intergranular corrosion; commonly specified for welded piping systems according to EN 10217-7 / EN 10216-5 requirements |
| High-Temperature Pressure Vessels (>425°C) | EN 1.4401 (316) | Provides higher carbon content, which can offer improved high-temperature strength and creep resistance compared with 316L in specific applications |
| Marine & Offshore Systems (Welded) | EN 1.4404 (316L) | Offers strong chloride corrosion resistance with PREN typically around 23–25 and better weld joint integrity in seawater environments |
| Machined Mechanical Tubing (Non-Welded) | EN 1.4401 or EN 1.4404 | Both grades provide similar corrosion resistance when welding and thermal sensitization risks are not involved |
To help determine the specific material form, could you please provide the following information?
Does your project involve welding or machining?
In what environment will the metal be used (e.g., marine, chemical processing, or food processing)?
Could you provide a photo or sketch of the component so I can assess the complexity of its design?
Purchasing Guidelines
1. Specify Dual Certification: Require the piping to hold dual certification for EN 1.4404/1.4401 (or 316/316L). Low-carbon steel (carbon content ≤ 0.030%) produced by modern steel mills can meet the mechanical property requirements of both standards simultaneously.
2. Review Mill Test Certificates (MTC, compliant with EN 10204 3.1): Verify that the carbon content is strictly controlled below 0.030% and the molybdenum content falls within the 2.00%–2.50% range.
3. Piping Manufacturing Standards:
Seamless pipe: EN 10216-5 (ASTM A312/ A269)
Welded pipe: EN 10217-7 (ASTM A312/ A249)


Send Inquiry






