What is X17CrNi16-2 equivalent material?
Aug 21, 2025
Leave a message
What material is 1.4057 stainless steel?
The material AISI 431, which equals 1.4057, BS 431S29, and X17CrNi16-2, is a stainless martensitic chromium-nickel steel with a chromium content of 15-17 %. Due to the high chromium content, this stainless steel has better corrosion resistance and toughness than comparable steels with a lower chromium content.It's often used in applications requiring a combination of strength and corrosion resistance, such as fasteners, shafts, and other mechanical components.
What material is 1.4057 equivalent to stainless steel?
| DIN EN 1.4057 Steel X17CrNi16-2 Material Equivalent | |||||||||
| European Union | US | ISO | China | Japan | |||||
| Standard | Designation (Material Number) | Standard | Grade (UNS) | Standard | Grade (ISO number ) | Standard | Name (Code) | Standard | Grade |
| EN 10088-2; EN 10088-3; EN 10088-1 |
X17CrNi16-2 (1.4057) | AISI; ASTM A240/A240M; ASTM A276/A276M; ASTM A959 |
AISI 431 (UNS S43100) |
ISO 15510 | X17CrNi16-2 (4057-431-00-X) | GB/T 1220; GB/T 3280 |
17Cr16Ni2 (S43120) | JIS G4303; JIS G4304 |
SUS431 |
1.4057 stainless steel Chemical Composition
X17CrNi16-2 material chemical composition is listed in the following table based on cast analysis.
| Chemical Composition, % | ||||||||
| Standard | Designation (Steel Number) | C | Si, ≤ | Mn, ≤ | P, ≤ | S, ≤ | Cr | Ni |
| EN 10088-2; EN 10088-3 |
X17CrNi16-2 (1.4057) | 0,12-0,22 | 1,00 | 1,50 | 0,040 | 0,015 | 15,0-17,0 | 1,50-2,50 |
EN 1.4057 Stainless Steel Mechanical Properties
| Mechanical properties at room temperature of heat-treated 1.4057 stainless steel in conditions 1C, 1E, 1D, 1X, 1G and 2D | ||||||||
| Standard | Steel Grade (Steel Number) | Thickness (t) or diameter (d) in mm | Heat treatment condition | Hardness, HBW | 0,2 % proof strength, Mpa (ksi), ≥ | Tensile strength, Mpa (ksi) | Elongation, %, ≥, (long.) | Impact energy (ISO-V), KV2, ≥ J (long.) |
| EN 10088-3 | X17CrNi16-2 (1.4057) | – | +A | 295 | – | 950 (138), ≤ | – | – |
| ≤ 160 | +QT800 | – | 600 (87) | 800-950 (116-138) | 14 | 25 | ||
| 60 | 12 | 20 | ||||||
| ≤ 160 | +QT900 | – | 700 (101) | 900-1050 (130-152) | 12 | 16 | ||
| 60 < t≤ 160 | 10 | 15 | ||||||
| Notes: Diameter: Width across flats for hexagons. Hardness: Only for guidance. For rods, only the tensile strength values apply. |
||||||||
Corrosion Resistance of 1.4057 Stainless Steel
1.4057 stainless steel, a martensitic stainless steel also known as X17CrNi16-2, has moderate corrosion resistance and is primarily suitable for use in mild environments. It offers good corrosion resistance to atmospheric air, freshwater, and some mild organic acids, but its performance is limited in highly corrosive environments such as seawater, strong acids, or chloride-rich environments.
Strength of 1.4057 Stainless Steel
After heat treatment (quenching and tempering), 1.4057 stainless steel bar typically has a tensile strength of 800 to 1100 MPa and a yield strength of approximately 600 to 900 MPa. This strength, combined with moderate ductility, makes it suitable for applications requiring high load-bearing capacity and wear resistance.
What is 1.4057 QT800?
1.4057 QT800 refers to martensitic stainless steel 1.4057 (X17CrNi16-2) that has undergone a special heat treatment-quenching and tempering (QT)-to achieve a tensile strength of at least 800 MPa (hence the name "QT800").
This heat treatment process involves heating the material to a high temperature, followed by rapid cooling (quenching) to form a martensitic structure, followed by tempering to relieve internal stresses while maintaining high strength. It is commonly used in engineering applications such as shafts, gears, and high-strength fasteners.
If you have a project need for 431 1.4507 stainless steel bar, we welcome your order. GNEE has a large inventory of popular products for you to choose from. We process these bars into a variety of practical product forms, including sheet, coil, tube, bar, and wire. For detailed chemical composition and free samples, please contact our factory today. We offer competitive pricing and excellent service.


Send Inquiry






