Will SUS316 stainless steel rust in a chloride ion environment?

Apr 09, 2025

Leave a message

Does SUS316 Stainless Steel Rust in Chloride Environments?- A Deep Dive into Corrosion Mechanisms and Real-World Applications

1. Corrosion Mechanism of Chloride Ions on Stainless Steel

Chloride ions (Cl⁻) are among the most aggressive and common corrosive agents for stainless steel. Their primary threat manifests in the form of pitting corrosion and crevice corrosion:

Passive Film Breakdown:
Stainless steel relies on a thin, stable chromium oxide passive film (Cr₂O₃) to resist corrosion. However, chloride ions tend to adsorb at vulnerable sites (e.g., grain boundaries, inclusions, or mechanically damaged regions), where they trigger electrochemical reactions that break down the film, initiating localized corrosion pits.

Autocatalytic Corrosion:
Once a pit forms, the chloride ion concentration inside the pit increases rapidly, leading to a highly acidic microenvironment (drop in local pH). This accelerates metal dissolution inside the pit, while the surrounding surface remains passivated. As a result, the corrosion progresses inward, often undetected until significant damage has occurred.

SUS316 Stainless Steel


2. Chloride Resistance of SUS316 Stainless Steel

SUS316 is a molybdenum-enhanced austenitic stainless steel developed from SUS304 (18Cr-8Ni) by adding 2–3% molybdenum (Mo) and a small amount of nitrogen (N). Its chloride resistance is significantly better than SUS304 due to the following:

Key Role of Molybdenum:
Molybdenum promotes the formation of molybdate species (MoO₄²⁻) within the passive film, enhancing its density and stability in reducing environments like those containing Cl⁻. This significantly increases the Critical Pitting Temperature (CPT), delaying or preventing pitting initiation.

Performance Comparison in Practice:

Material Corrosion Rate in 10% HCl at 300℃ (mm/year) Surface Condition After 5,000 Hours Chloride-Related Failure Modes
SUS304 > 2.0 Extensive pitting, local perforation (within 2,000 hours) Chloride ion penetration through grain boundaries, leading to pitting
SUS316 0.12–0.15 Mild uniform corrosion, intact passivation film No significant failure (excellent pitting resistance)
Hastelloy C-276 0.05–0.08 Virtually no corrosion -

 

SUS316 stainless steel exhibits excellent corrosion resistance in most conventional chloride ion environments. The 2-3% molybdenum element it contains can significantly enhance the density of the passivation film and increase the critical concentration of pitting corrosion. It is not easy to rust in normal temperature seawater, medium and low concentration salt solutions or medium strength hydrochloric acid (such as 10% concentration, below 300°C). Only slight uniform corrosion occurs within 5000 hours and the passivation film remains intact. However, pitting or crevice corrosion may still be caused by chloride ions in high temperature and high concentration chloride ions (such as saturated salt water boiling environment), crevice enrichment areas (such as flange connections) or when the surface passivation film is damaged. 

 

Send Inquiry