SS 304L Stainless Steel Tubes For Condensers
Feb 05, 2026
Leave a message
GNEE is the largest stockist, and we have a large inventory of stainless steel condenser tubes, including 316 stainless steel condenser tubes, 316L stainless steel condenser tubes, 304 stainless steel condenser tubes, 304L stainless steel condenser tubes, and 201 stainless steel condenser tubes.
GNEE Stainless Steel's SS 304L condenser tubes are widely used in various heat exchangers, from condensers and evaporators in refrigeration units and cooling cycles to steam condensation in surface condensers, and various applications in between. Typically, these stainless steel condenser tubes have outer diameters (O.D.) of 5/8 inch, 3/4 inch, and 1 inch. Ammonia refrigeration systems, in particular, use tubes larger than these sizes. The condenser tubes can also be surface-enhanced on both the inside and outside to further improve their efficiency.

Stainless Steel Condenser Tube Specification
Specification : ASTM A213, A249, A269
Size Range :6 mm OD to 219.1 mm
ODOutside Diameter:6mm-2500mm
Length :1 Mtr Upto 32 Mtrs Long
Thickness : 0.7 mm thk To12.7 mm
Shapes : Straight tube, Coil tubing
Form : Seamless, Welded
Hot rolled, Cold drawnGrades : TP - 304, 304L, 316, 316L
SS TP304L Solution Anneal Condenser Tube Chemical Composition
| Grades | UNS | Si | Mn | S | P | C | Cr | Ni | Mo |
|---|---|---|---|---|---|---|---|---|---|
| TP304 | S30400 | 1 | 2 | 0.03 | 0.045 | 0.08 | 18.0-20.0 | 8.0-11.0 | - |
| TP304L | S30403 | 1 | 2 | 0.03 | 0.045 | 0.035 | 18.0-20.0 | 8.0-13.0 | - |
SS TP304L Evaporator Tubes Mechanical Properties
| Material | Heat | Temperure | Tensile Strength | Yield Strength | Elongation %, Min |
|---|---|---|---|---|---|
| Treatment | Min.º F(º C) | Ksi (MPa), Min. | Ksi (MPa), Min. | ||
| TP304 | Solution | 1900 (1040) | 75(515) | 30(205) | 35 |
| TP304L | Solution | 1900 (1040) | 70(485) | 25(170) | 35 |
SS 304L stainless steel condensers tubes applications
Heat Exchangers & Condensers: Used in shell and tube heat exchangers, surface condensers, and evaporator coils for refrigeration.
Chemical and Petrochemical Processing: Ideal for handling, cooling, and condensing corrosive fluids due to high resistance and low-carbon content that resists sensitization.
Power Generation: Employed in steam condensers within power plants.

GNEE provides manufacturer's test certificates (TC) compliant with EN 10204/3.1B standard, raw material certificates, 100% radiographic testing reports, and third-party inspection reports. We also provide certificates conforming to standards such as EN 10204 3.1 and additional requirements such as NACE MR 01075.
• EN 10204/3.1B
• Raw material certificates
• 100% radiographic testing reports
• Third-party inspection reports, etc.

Packaging and Marking:
The products shall be packaged in bundles or plywood crates, wrapped in plastic, and protected with appropriate measures to ensure seaworthy transportation or as required.
Markings shall conform to the requirements of specification A1016/A1016M, and shall include whether the tubing is hot-worked or cold-worked, including but not limited to: standard, grade, size, heat number, and lot number.

Send Inquiry






