ASTM A358 TP316 Stainless Steel EFW Pipes
Technique:Cold Rolled
Material:Stainless Steel
Section Shape
Welding:ERW, Efw
Surface:Mechanically Polished
Od:6.0-200mm
Thickness:0.3-20 mm
Length:6000mm or as Customzied
ASTM A358 TP316 Stainless Steel EFW Pipes introduction
The ASTM A358 standard applies to welded austenitic stainless steel pipes intended for use in corrosive environments, high-temperature service, and general industrial applications. ASTM A358 defines various pipe classes based on welding construction and inspection requirements; for instance, Class 1 requires double-sided welding with filler metal and full-length radiographic testing (RT), whereas other classes specify different RT requirements tailored to application needs.
The ASTM A358 TP316 pipes we supply are typically delivered in the solution-annealed condition; this process involves heating the pipe to approximately 1040–1120°C followed by rapid cooling to restore corrosion resistance and enhance metallurgical stability. This treatment helps dissolve chromium carbides, prevents sensitization, and preserves the excellent chloride corrosion resistance characteristic of molybdenum-bearing TP316 stainless steel.

ASTM A358 TP316 EFW pipes are manufactured using automatic submerged arc welding (SAW) or electric fusion welding techniques, with optimized welding current, voltage, and travel speed to ensure consistent penetration and uniform weld bead formation. Furthermore, the weld zones undergo 100% radiographic testing (RT), liquid penetrant testing (PT), ultrasonic testing (UT), or hydrostatic testing-depending on project specifications-to effectively minimize the risk of defects such as lack of fusion, cracks, porosity, and incomplete penetration.

Material Test Certificates (MTC) compliant with EN 10204 3.1 are provided for every batch, covering chemical composition analysis, mechanical properties, heat treatment records, and inspection results.

ASTM A358 TP316 EFW Pipe Specification
| Standard | ASTM A358 / A358M-24 |
| Grade | TP316 (UNS S31600) |
| Welding Method | Electric Fusion Welding (EFW) - single longitudinal seam |
| Size Range | NPS 8" – NPS 48" (OD 219.1 – 1219.2 mm) |
| Wall Thickness | 2.5 – 32 mm (SCH 5S / 10S / 40S / 80S) |
| Length | 6 m fixed or double random (one circumferential joint) |
| Class | CL1 (single seam), CL2 (double seam), CL3–CL5 (per spec) |
| Pipe Ends | Plain ends / Beveled ends |
| Forming | Cold or hot rolled skelp, solution-annealed condition |
Chemical Composition (wt %)
| Element | C | Mn | P | S | Si | Cr | Ni | Mo |
| TP316 | 0.08 max | 2.00 max | 0.045 max | 0.030 max | 1.00 max | 16.0 – 18.0 | 10.0 – 14.0 | 2.00 – 3.00 |
Mechanical Properties (Solution-Annealed)
| Property | Requirement |
| Tensile Strength | ≥ 70 ksi (485 MPa) |
| Yield Strength (0.2% offset) | ≥ 30 ksi (205 MPa) |
| Elongation (2 in. gauge) | ≥ 35 % |
| Reduction of Area | ≥ 50 % |
Heat Treatment
| Parameter | Value |
| Process | Solution Annealing |
| Temperature | 1900 °F (1040 °C) min |
| Cooling | Water quench or air cool (per order) |
| Stress Relief | Not required for austenitic grades |
ASTM A358 Pipes Dimensions & Tolerances
| Parameter | Tolerance |
| OD (NPS 8"–18") | +0.5% / −0.3% |
| OD (NPS > 18") | ± 1/16 in. (± 1.6 mm) |
| Wall Thickness (NPS ≤ 2½") | +20% / −0% |
| Wall Thickness (NPS 3"–18", t/D ≤ 5%) | +22.5% / −12.5% |
| Wall Thickness (NPS 3"–18", t/D > 5%) | +15% / −12.5% |
| Straightness | ≤ 0.15% of length, max 4 mm/m |
| Length (cut-to-length) | +1/2 in. / −0 |
| Out-of-roundness | ≤ 1% of OD |
Quality Inspection
Regarding weld quality, ASTM A358 TP316 EFW pipes are manufactured using automatic electric fusion welding technology, performed by qualified welders or operators in accordance with certified Welding Procedure Specifications (WPS) and Procedure Qualification Records (PQR). Depending on the pipe grade, weld inspection requirements may include full-length radiographic testing (RT), spot radiographic testing, hydrostatic testing, liquid penetrant testing (PT), and dimensional inspection.


Standard export packaging
GNEE uses export-standard packaging for ASTM A358 TP316 Stainless Steel EFW Pipes to ensure safe transportation and maintain pipe quality during long-distance shipment. Each pipe is cleaned, dried and protected with plastic end caps, bevel protectors and waterproof wrapping before packing. Pipes are normally bundled with steel straps and fixed on wooden or steel frames to prevent movement and surface damage. For large diameter pipes (NPS 24"–100") or polished surfaces, individual protection is applied.


fAQ
Q: What is the difference between TP316 and TP316L? Which one should I choose?
A: TP316L has a lower carbon content (≤0.03%) and offers superior resistance to intergranular corrosion after welding. If your piping application involves a risk of corrosion in the heat-affected zone post-welding (e.g., in chemical plants or environments with corrosive media), TP316L is generally the recommended choice.
Q: Does ASTM A358 piping require full-length heat treatment?
A: It depends on the specific Class. ASTM A358 categorizes pipe into Classes 1 through 5. For instance, Class 1 requires 100% radiographic testing and full-length solution heat treatment. Please confirm the required Class specified by the design institute when placing your order; we can manufacture the pipe accordingly.
Q: How is the quality of the EFW weld seam ensured?
A: We utilize an automated Submerged Arc Welding (SAW) process equipped with a real-time weld tracking system. Before leaving the factory, all pipes undergo standard RT (Radiographic Testing) or UT (Ultrasonic Testing) and 100% hydrostatic testing.
Q: Do you accommodate Third-Party Inspection (TPI)?
A: Yes, absolutely. We have extensive experience cooperating with third-party inspection agencies such as SGS, BV, TUV, and DNV, and we fully facilitate sampling tests and visual inspections.
Q: What is the out-of-roundness specification for large-diameter pipes?
A: We strictly adhere to the dimensional tolerance standards set by ASTM A358. For extra-large diameter pipes, we control out-of-roundness using a specialized pipe-expanding process to ensure that the pipe-end fit-up gap meets on-site installation requirements.
Q: Can the bevel angle be customized?
A: Yes. We can provide standard 30° or 37.5° bevels-along with deburring-based on the specific pipeline connection method (such as butt welding) required by the customer. Q: How is packaging designed to prevent deformation during sea transport?
A: For large-diameter pipes, we install bevel protectors to prevent damage to the pipe ends. For thin-walled, large-diameter pipes, we install internal support frames and secure the pipes using wooden saddles or steel racks to prevent ovalization during transit.
Hot Tags: astm a358 tp316 stainless steel efw pipes, China astm a358 tp316 stainless steel efw pipes manufacturers, suppliers, factory, stainless steel welded pipe standard, ASTM A312 TP304 Stainless Steel Welded Pipe, welded stainless steel pipe standard, stainless steel welded tubing installation, ASTM A554 Stainless Steel Tubing, welded stainless steel tubing fabrication
You Might Also Like
Send Inquiry










