309S Stainless Steel:High-Temperature Oxidation Resistance With High Chromium-Nickel Content

Dec 18, 2025

Leave a message

what is the 309s stainless steel?

309S (UNS S30908) is a low-carbon, high-chromium and high-nickel austenitic stainless steel specially developed for high-temperature service environments. Compared with conventional 304 and 316 stainless steel, 309S features upgraded Cr-Ni alloy ratios, delivering outstanding high-temperature oxidation resistance, thermal stability and elevated-temperature mechanical performance. It is the cost-effective mainstream material for industrial furnaces, high-temperature flue systems and heat treatment equipment.

 

Equivalent Grades of 309S Stainless Steel

309S (UNS S30908) is a widely standardized heat-resistant austenitic stainless steel. Below are its mainstream global equivalent grades for international procurement and engineering substitution.

Standard System

Equivalent Grade

Remarks

ASTM / UNS

UNS S30908, AISI 309S

Original standard grade

European EN / W.Nr

1.4833, X12CrNi23-13

Full chemical & performance equivalence

Chinese GB

0Cr23Ni13

Domestic corresponding heat-resistant steel

French AFNOR

Z15CN24-13

Equivalent industrial grade

JIS Japanese

SUS309S

Universal alternative for Asian projects

Substitution Note: 309 (high-carbon version) is not interchangeable with 309S. Only low-carbon 309S / 1.4833 grades are applicable for welded high-temperature components.

 

Chemical Composition of 309S Stainless Steel (ASTM A240, wt%)

309S features high chromium and high nickel alloy design with strict low-carbon control, which guarantees excellent high-temperature oxidation resistance and welding performance.

Element

Content Range

Carbon (C)

≤0.08

Chromium (Cr)

22.0–24.0

Nickel (Ni)

12.0–15.0

Manganese (Mn)

≤2.00

Silicon (Si)

≤1.00

Phosphorus (P)

≤0.045

Sulfur (S)

≤0.030

All data comply with ASTM A240 / A480 standards, applicable to plates, sheets, strips and pipes. Stable mechanical properties ensure structural safety under high-temperature cyclic working conditions.

 

Mechanical Properties of 309S Stainless Steel

Standards: ASTM A240 / A480, solution‑annealed condition, minimum values at room temperature. Applicable for plates and strips; refer to ASTM A312 for pipes.

Property Item Standard Requirement Unit
Tensile Strength (Rm) ≥515 MPa
0.2% Offset Yield Strength (Rp0.2) ≥205 MPa
Elongation A (50 mm gauge length) ≥40 %
Brinell Hardness (HB) ≤217 HB
Rockwell Hardness (HRB) ≤95 HRB

 

Key Performance Advantages of 309s stainless steel

1. What makes 309S stand out in high-temperature oxidation environments?

309S features a high chromium-nickel formula tailored for high-temperature oxidation. It forms a dense, stable chromium oxide film, supporting continuous service at 980°C–1000°C with low oxidation rates. Compared with 304 and 316, 309S performs much better under repeated heating and high-temperature flue gas conditions, preventing surface scaling, peeling and component failure.

2. Does 309S maintain stable high-temperature mechanical properties?

Yes. Its balanced austenitic Cr-Ni structure maintains stable tensile strength and good ductility at high temperatures. It resists thermal brittleness, deformation and performance degradation during long-term heating and thermal cycling, satisfying structural safety requirements for high-temperature equipment.

3. What other corrosion resistance does 309S offer?

Besides excellent oxidation resistance, 309S provides strong resistance to high-temperature carburization, sulfide corrosion and atmospheric corrosion. It adapts well to complex high-temperature environments with sulfur and trace corrosive media, ideal for industrial heating and flue gas treatment systems.

4. How is the weldability and processability of 309S?

309S uses a low-carbon design to avoid welding sensitization and intergranular corrosion, requiring no post-weld solution treatment. Matched with ER309L welding wire, it produces stable, crack-free welds. It also offers good cutting, bending and forming performance for customized furnace parts and high-temperature fittings.

 

309S VS Conventional Stainless Steel

309S vs 304: 309S has far higher chromium and nickel content, with 2–3 times stronger high-temperature oxidation resistance, completely suitable for high-temperature scenarios where 304 fails.

309S vs 310S: 310S has higher temperature resistance, but with higher cost. 309S is more cost-effective for working conditions below 1000°C, achieving balanced performance and price.

 

Typical Industrial Applications

With its perfect combination of high-temperature oxidation resistance and processability, 309S is the preferred material for medium and high-temperature industrial equipment, widely used in multiple industries:

1.Industrial Furnace Equipment:

Furnace lining plates, furnace doors, heat treatment material baskets, furnace tubes and heating furnace accessories

2.High-Temperature Pipeline System:

High-temperature flue gas pipes, boiler exhaust pipes, heat exchanger tubes and high-temperature air ducts

3.Thermal Processing Industry:

Heat treatment fixture components, annealing furnace parts, sintering equipment accessories

4.Chemical & Environmental Protection:

High-temperature waste gas treatment equipment, sulfur-containing flue gas pipelines, high-temperature corrosion-resistant containers

Heating furnace piping

Heating furnace piping

Petrochemical heating furnace coils

Petrochemical heating furnace coils

High-temperature industrial flue gas piping

High-temperature industrial flue gas piping

Exporter of 309s stainless steel

GNEE is a professional Chinese exporter of 309S stainless steel. We supply a full range of UNS S30908 (1.4833 / SUS309S) products, including plates, coils & strips, seamless pipes, welded pipes, bars and pipe fittings. Our products comply with international standards such as ASTM A240, ASTM A312 and EN 10088, suitable for working conditions of industrial furnaces, high‑temperature flue gas and heat‑treatment equipment. Free samples are available. Surface finishes including NO.1, 2B and BA can be provided. Custom deep‑processing services such as cut‑to‑length, beveling and polishing are supported. We maintain stock for regular high‑temperature specifications, and accept both small and bulk orders. Our products are exported to more than 60 countries and regions around the world. If you are looking for high‑quality 309S stainless steel products, we can provide you with professional procurement solutions.

309S Stainless Steel Plates

309S Stainless Steel Plates

309S Stainless Steel Pipes

309S Stainless Steel Pipes

309S Stainless Steel Coils

309S Stainless Steel Coils

If you need specific information, tell me:

Are you looking for material in sheet, plate, or pipe form?

What maximum temperature or environment will it face?

Contact now

FAQ

1.What is the maximum working temperature of 309S stainless steel?

309S can work continuously at 980°C and withstand intermittent high temperature up to 1000°C, with stable oxidation resistance and no obvious scaling.

 

2.Why is 309S better than 304 for high-temperature environments?

309S has higher chromium and nickel content. The dense chromium oxide film it formed can resist high-temperature oxidation effectively, while 304 is prone to severe oxidation and peeling above 600°C.

 

3.Does 309S require post-weld heat treatment?

No. As a low-carbon S-grade stainless steel, 309S avoids welding sensitization and intergranular corrosion, requiring no post-weld solution annealing.

 

4.What is the difference between 309 and 309S?

309 has higher carbon content, while 309S adopts low-carbon design, with better weldability and high-temperature stability, more suitable for welded high-temperature equipment.

 

 

Send Inquiry