ASTM A213 Grade T5 Alloy Steel Seamless Tube for Heat Exchanger
ASTM A213 T5 is a seamless alloy steel pipe manufactured according to specific ASTM standards for high-temperature applications such as boilers, superheaters, and heat exchangers. T5 steel, a ferritic steel specified in the American ASTM A213 standard, contains chromium (4.00-6.00%) and molybdenum (0.45-0.65%), offering excellent heat resistance, corrosion resistance, and strength. Its excellent heat and corrosion resistance in hot petroleum media, combined with its excellent hot and cold working properties, makes it widely used in heat exchangers in the petrochemical industry.

Product grades: T2, T5, T5b, T5C, T9, T11, TI2, T21, T22, T23, T91 (Type1. Type2), T92, etc.
Product specifications:
Outer diameter 21.3mm~762mm
Wall thickness 2.0mm~130mm
Production method: hot rolling, cold drawing, hot expansion
Delivery status: Heat treatment and products should be confirmed to comply with the requirements of TSGD7002-2006 "Type Test Rules for Pressure Pipe Components".
Surface Condition
ASTM A213 T5 Seamless Ferritic alloy cold-finished steel tubes shall be free of scale and suitable for inspection. A slight amount of oxidation is not considered scale.
ASTM A213 T5 Seamless Ferritic alloy hot-finished steel tubes shall be free of loose scale and suitable for inspection.
Any special finish requirement be subject to agreement between the supplier and the purchaser.
ASTM A213/ASME SA213 T5 Alloy Steel Seamless Tube Chemical Composition(%)
| Grade | Chemical Composition(%) | ||||||
| C | Mn | P | S | Si | Cr | Mo | |
| A213 T5 | ≤0.15 | 0.30-0.60 | ≤0.025 | ≤0.025 | ≤0.50 | 4.00-6.00 | 0.45-0.65 |
ASTM A213/ASME SA213 T5 Alloy Steel Seamless Tube Mechanical & Physical Properties
| Grade | Mechanical property | |||
| Tensile Strength(MPa) | Yield Strength(MPa) | Elongation(%) | Hardness(HB) | |
| A213 T5 | ≥415 | ≥205 | 30 | ≤163 |
Note: Mechanical property requirements do not apply to tubing smaller than 1⁄8 in. [3.2 mm] in inside diameter or thinner than 0.015 in. [0.4 mm] in thickness.
ASTM A213/ASME SA213 T5 Alloy Steel Seamless Tube Size Tolerance
| Outside Diameter | OD Tolerance | WT Tolerance | Ovality Tolerance | Cut Length Tolerance |
| OD≤ 12, 7 mm | ± 0, 13 mm | ± 15 % | – | + 3, 18 mm, – 0 mm |
| 12, 7 mm < OD ≤ 38, 1 mm | ± 0, 13 mm | ± 10 % | max, 1, 65 mm | + 3, 18 mm, – 0 mm |
| 38, 1 mm < OD ≤ 88, 9 mm | ± 0, 25 mm | ± 10 % | max, 2, 41 mm | + 4, 76 mm, – 0 mm |
|
Trade Name |
Grade |
UNS # |
Heater Tubes |
|
1 1/4 Chrome |
T11 |
K11597 |
A213 / SA213 |
|
2 1/4 Chrome |
T22 |
K21590 |
A213 / SA213 |
|
5 Chrome |
T5 |
K41545 |
A213 / SA213 |
|
9 Chrome |
T9 |
K90941 |
A213 / SA213 |
|
T91 |
T91 |
K90901 |
A213 / SA213 |
|
T92 |
T92 |
K92460 |
A213 / SA213 |
Applications
Power Generation
Petrochemical Industry
Oil and Gas
Automotive
Aerospace
Heat Exchangers
Boilers
Tests and Inspection
Tension Tests- One tension test shall be made on a specimen from one tube for lots of not more than 50 tubes. Tension tests shall be made on specimens from two tubes for lots of more than 50 tubes.
Flattening Test-One flattening test shall be made on specimens from each end ofone finished tube, not the one used for the flaring test, from each lot.
Flaring Test-One flaring test shall be made on specimens from each end of one finished tube, not the one used for the flattening test, from each lot.
Hydrostatic or Nondestructive Electric Test-Each tube shall be subjected to the nondestructive electric test or the hydrostatic test.
Hardness Tests-Brinell, Vickers, or Rockwell hardness tests shall be made on specimens from two tubes from each lot.


Packaging and Marking:
Packaged in bales or laminated wooden crates, wrapped in plastic, and appropriately protected to ensure seaworthiness for transport, or as required.
Marking must comply with Specification A1016/A1016M. Marking must include information on whether the pipe is hot-finished or cold-finished, including but not limited to: standard, grade, size, heat number, and batch number.

Send Inquiry






