what is en 1.4512 equivalent grade?
Dec 29, 2025
Leave a message
What is EN 1.4512 stainless steel?
EN 1.4512 is a standardized titanium-stabilized ferritic stainless steel. Due to its body-centered cubic (BCC) ferritic structure, it is magnetic under all conditions, exhibits good high-temperature oxidation resistance up to approximately 750°C, and offers cost advantages compared to austenitic stainless steels. It is commonly used in automotive exhaust systems, catalytic converter housings, mufflers, and resonators.
what is en 1.4512 equivalent grade?
EN 1.4512 is a stabilized ferritic stainless steel, commonly known as AISI 409, UNS S40900, or X2CrTi12, primarily used in automotive exhaust systems due to its good corrosion resistance, weldability, and cost-effectiveness, with titanium stabilization enhancing performance.
|
|
|
|
|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
EN 1.4512 Chemical Composition (Typical, %)
|
|
|
|
|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
EN 1.4512 Mechanical Properties
|
|
|
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Is EN 1.4512 stainless steel magnetic?
Yes, EN 1.4512 is magnetic. As it is a ferritic stainless steel, it retains magnetic properties under all conditions. This helps in classifying mixed stainless steel inventories.
Weldability of EN 1.4512 / AISI 409
EN 1.4512 can be easily welded using methods such as TIG, MIG, and resistance welding. No preheating is required, but post-weld annealing at temperatures between 760–830°C is recommended to restore corrosion resistance in the heat-affected zone.
Comparison of EN 1.4512 and 304 Stainless Steel
304 stainless steel (austenitic, 18% Cr, 8-10% Ni) is non-magnetic and offers better corrosion resistance (with a PREN value of approximately 18-19, compared to 1.4512's PREN value of around 10-12). However, 304 stainless steel is about 20-30% more expensive per kilogram. EN 1.4512 is ideal for high-temperature exhaust systems with low chloride content.
Comparison of EN 1.4512 and 430 Stainless Steel
430 (1.4016) has a higher chromium content (16-18%) and offers better corrosion resistance, but EN 1.4512 adds titanium to improve welding stability. 430 is suitable for indoor panels, while 1.4512 performs excellently in welded exhaust systems.
Applications of EN 1.4512 Stainless Steel
Approximately 80% of EN 1.4512 is used in automotive exhaust systems (mufflers, catalytic converters, resonators). It is also utilized in heat exchangers, industrial silencers, and ventilation systems, all of which have high demands for cost and heat resistance.
If you are looking for EN 1.4512 stainless steel, you are likely evaluating materials for high-temperature, corrosion-resistant applications. EN 1.4512 (European standard) is a ferritic stainless steel widely used in automotive exhaust systems, heat exchangers, and industrial mufflers. GNEE has a large inventory of this popular product for you to choose from. It can be processed into various practical product forms, including plates, coils, tubes, bars, and wires. For detailed chemical composition and free samples, please contact our factory immediately.
Click to obtain the EN 1.4512 material list


Send Inquiry






