304 Stainless Steel Sheet 2B Finish
May 09, 2025
Leave a message
What Is a 2B Finish on Stainless Steel?
The 2B finish is a smooth, dull gray surface produced by cold rolling, annealing, pickling, and a final light pass on polished rolls. It provides a clean, uniform appearance with good corrosion resistance, and is ideal for applications where appearance is not critical but cleanliness and consistency are important.
304 Stainless Steel Sheet – 2B Finish
Grade: AISI 304 / EN 1.4301
Finish: 2B (Cold Rolled, Annealed, Pickled, and Lightly Rolled)
Type: Austenitic Stainless Steel Sheet
Technical Specification Table
| Item | Specification |
|---|---|
| Material Grade | AISI 304 / EN 1.4301 / X5CrNi18-10 |
| Finish Type | 2B – Smooth, Matte, Reflective Cold Rolled Finish |
| Thickness Range | 0.3 mm – 6.0 mm |
| Standard Widths | 1000 mm, 1219 mm (48"), 1500 mm |
| Standard Lengths | 2000 mm, 2438 mm (96"), 3000 mm, or custom |
| Manufacturing Standard | ASTM A240 / EN 10088-2 |
| Surface Processing | Cold Rolled → Annealed → Pickled → Skin-Passed |
| Tensile Strength | ≥ 520 MPa |
| Yield Strength | ≥ 205 MPa |
| Elongation | ≥ 45% |
| Hardness | ≤ 201 HB |
| Density | 7.93 g/cm³ |
| Corrosion Resistance | Excellent in atmospheric and mild chemical environments |
| Magnetic Properties | Non-magnetic in annealed condition |
| Applications | Kitchen equipment, food processing, tanks, panels, decorative trim, cleanrooms |
GNEE 2B surface 304 steel plate in stock
The following are the stainless steel plates we can provide:
Material Grade: 304/304L/316/316L/321/321H/309s/310/310s/317L/310H/410/420/430/904L
Standards: AISI, ASTM, JIS, SUS and GB
Size: According to the customer's requests
Surface Finished: BA, 2B, NO.1, NO.4, 4K, HL, 8K
Send Inquiry