ASTM A790 UNS S31803 Duplex Stainless Steel Tubing

ASTM A790 UNS S31803 Duplex Stainless Steel Tubing

Standard:ASTM A790 / ASME SA790
Material Grade:UNS S31803
EN Equivalent:1.4462 / X2CrNiMoN22-5-3
Steel Type:Ferritic-Austenitic Duplex Stainless Steel
Product Form:Seamless Tube / Welded Tube
Manufacturing Process:Hot Finished / Cold Finished
Size Range:OD 6.0 mm – 610 mm (custom sizes available)
Wall Thickness:0.5 mm – 50 mm
Length:5.8 m / 6 m / 12 m / Custom Length
End Type:Plain End, Beveled End, Threaded End
Surface Finish:Pickled, Annealed & Pickled, Polished, Customized
Send Inquiry
Chat Now

ASTM A790 UNS S31803 Duplex Stainless Steel Tubing Supplier

If you are looking for a duplex stainless steel seamless pipe that balances high strength, chloride corrosion resistance, and cost control, ASTM A790 UNS S31803 (2205) is a widely chosen option in oil & gas, seawater, and chemical systems. Compared with 316L, S31803 offers higher strength and superior pitting resistance while maintaining competitive material costs. In the annealed condition, the yield strength of S31803 is typically ≥450 MPa (65 ksi) and the tensile strength is ≥620 MPa (90 ksi), which is roughly double that of conventional 316L. Consequently, under identical design pressure and specification requirements, certain engineering projects can reduce material usage by approximately 30–40% through wall thickness optimization, thereby lowering piping weight and support structure costs.

 

GNEE supplies ASTM A790 UNS S31803 seamless pipes covering an outer diameter range of OD 1/4″–10″ (approx. 6–273 mm) and wall thickness from 0.5 to 20 mm, with production or supply capabilities according to Sch 5S–160S / XXS requirements. Length options include SRL 5–6 m, DRL 11–12 m, as well as cut-to-length service, with cutting tolerances controlled per order specifications. The standard surface finish is solution annealed & pickled, with cold drawn precision finishing available for special specifications.

ASTM A790 UNS S31803 seamless pipes
ASTM A790 UNS S31803 seamless pipes
ASTM A790 UNS S32205 Stainless Steel pipes
ASTM A790 UNS S32205 Stainless Steel pipes

To help you select the information suitable for this project, could you please provide the following details?
Do you require seamless or welded pipes?
What are the required outside diameter (OD) and wall thickness?
What specific operating environment or media conditions will the pipes be exposed to (e.g., temperature, chloride content, pressure)?

Contact now

UNS S31803 Stainless Steel Pipe Specification

Duplex Stainless Steel 2205 Seamless Pipe Chemical Composition

C N P Si Mn Mo Fe Cr S Ni
1.0 0.03 0.02 2.0 3.0 - 3.5 22.0 - 23.0 0.03 4.5 - 6.5 0.14 - 0.2 Bal

 

ASME SA 790UNS S32205 Tube Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
7.8 g/cm3 1350 °C (2460 °F) Psi - 80000 , MPa - 550 Psi - 116000 , MPa - 800 15 %

 

2205 Duplex Stainless Steel Tube Equivalent grades

STANDARD WERKSTOFF NR. UNS
Alloy 2205 Pipe 1.4462 / 1.4462 S31803 / S32205

 

ASTM A790 Dimensional Tolerances 

Standard variations allowed for Duplex tubing.

Parameter Outside Diameter (OD) Wall Thickness (WT)
1/8" to 1-1/2" ±0.40 mm (0.015 in) +20.0% / -12.5%
> 1-1/2" to 4" ±0.79 mm (0.031 in) +15.0% / -12.5%
> 4" to 8" +1.59 / -0.79 mm (+1/16, -1/32 in) +15.0% / -12.5%
Straightness 3.2 mm in 3.0 m (1/8 in per 10 ft) -

 

Applications of ASTM A790 UNS S31803 pipe:

Particularly suitable for operating conditions demanding high pressure resistance, resistance to chloride corrosion, and high reliability. Applications include offshore oil and gas platforms, seawater cooling systems, SWRO desalination plants, chemical processing units, FGD desulfurization systems, pulp bleaching equipment, and marine engineering pipelines.

 

To help narrow down information for your project, could you share:
What specific industry or environment (marine, chemical, oil & gas, etc.) the pipe will be used in?
Whether you need seamless or welded pipe specifications?

Contact now

Quality Control

Each batch of products can be accompanied by EN 10204 3.1 material certificates and heat-traceable MTCs, with 100% hydrostatic testing, PMI/OES optical emission spectrometry analysis, UT, RT, PT, and other NDT inspections conducted according to project requirements, along with PREN calculation and material compliance documentation. For sour gas, offshore, and major energy projects, material requirements such as NACE MR0175 / ISO 15156, Aramco, ADNOC, NORSOK, etc. can be evaluated based on customer project specifications. Delivery lead time for stock specifications is approximately 2–3 weeks, while non-stock or customized specifications usually take about 6–10 weeks, with exact delivery times confirmed according to specifications, quantities, and testing requirements.

2205 pipe PMI
2205 pipe PMI

Pipe diameter measurement

Pipe diameter measurement

Ultrasonic testing

Ultrasonic testing

Impact test

Impact test

Tensile test

Tensile test

Intergranular corrosion

Intergranular corrosion

GNEE PACKAGING AND SHIPPING

ASTM A790 UNS S31803 duplex stainless steel tubing is bundled using waterproof paper, plastic end caps, and steel strapping; wooden crates or pallets can be added for protection during export shipping. Each bundle is marked with specifications, material grade, heat number, and quantity to ensure moisture resistance, impact protection, and traceability during long-distance ocean transport.

 

PACKAGING AND SHIPPING

FAQ

What is the difference between S31803 and S32205?
Both belong to the Duplex 2205 grade, but S32205 has stricter compositional controls: Cr 22–23%, Mo 3.0–3.5%, and N 0.14–0.20%, whereas S31803 has broader ranges. S32205 has a typical PREN of approximately 35–36, making it better suited for high-chloride offshore environments.

 

How do I choose between S31803 and 316L?
If high strength and chloride corrosion resistance are the priorities, S31803 is more suitable: it has a minimum yield strength of approximately 450 MPa and a PREN typically above 31, compared to a PREN of around 24 for 316L. 316L is a better choice when general corrosion resistance, formability, and ease of welding are the primary considerations.

 

What pressure can S31803 withstand?
S31803 does not have a fixed maximum pressure rating; it must be calculated based on outside diameter, wall thickness, design temperature, corrosion allowance, and piping specifications. While it has a minimum yield strength of approximately 450 MPa and a tensile strength of 620 MPa, the actual allowable pressure must be determined based on specific pipe dimensions.

 

What is the MOQ for S31803 seamless pipe?
Stock sizes (1/2″–6″, Sch 40S/80S, SRL): Minimum 10 lengths; Non-stock/custom lengths: Usually 5–10 metric tons minimum; Large diameters (>10″) or XXS wall thickness: Quoted on a project-specific basis.

Hot Tags: ASTM A790 UNS S31803 Duplex Stainless Steel Tubing, China ASTM A790 UNS S31803 Duplex Stainless Steel Tubing manufacturers, suppliers, factory, seamless stainless steel pipe for standard applications, SS 316 316L Hydraulic Pipe, ASTM A312 Grade 347H Stainless Steel Pipe, stainless steel seamless pipe elongation testing, 316 Stainless Steel Seamless Pipe, ASTM A213 Stainless Steel Heat Exchanger Tubes

Send Inquiry