310 vs 310s stainless steel: corrosion resistance
Apr 02, 2025
Leave a message
310 and 310S stainless steel are both high-alloy austenitic stainless steels, mainly used in high-temperature environments. Their corrosion resistance is similar in most scenarios, but the specific performance varies due to differences in carbon content. The following is a comparison of the corrosion resistance of the two and selection recommendations:
310 vs. 310S Stainless Steel:Chemical Composition
| Element | 310 Stainless Steel (wt%) | 310S Stainless Steel (wt%) |
|---|---|---|
| Carbon (C) | ≤0.25 | ≤0.08 |
| Chromium (Cr) | 24.0–26.0 | 24.0–26.0 |
| Nickel (Ni) | 19.0–22.0 | 19.0–22.0 |
| Manganese (Mn) | ≤2.00 | ≤2.00 |
| Silicon (Si) | ≤1.50 | ≤1.50 |
| Phosphorus (P) | ≤0.045 | ≤0.045 |
| Sulfur (S) | ≤0.030 | ≤0.030 |

310 vs 310s stainless steel: corrosion resistance
High temperature oxidation environment
Both of them form a dense oxide film (Cr₂O₃) through chromium, but 310 is more likely to form carbides at high temperatures due to its high carbon content, which weakens the continuity of the oxide film and requires regular maintenance for long-term use. 310S is optimized by low carbon + high nickel, with stronger anti-oxidation stability and a maximum continuous use temperature of 1200℃.
Acidic medium
310S: It performs well in strong oxidizing acids such as sulfuric acid and phosphoric acid, with a corrosion rate of less than 0.1mm/year (50% sulfuric acid environment), suitable for chemical reactors and pickling equipment.
310: It has weak acid resistance, especially in high-temperature dilute sulfuric acid, and is prone to uniform corrosion, which is more suitable for neutral or weak acid scenarios.
Chloride environment
310S has a higher nickel content (19-22%), and its resistance to chloride ion pitting is better than 310. In marine engineering and salt spray environments, the critical pitting temperature of 310S is 20-30℃ higher than that of 310, making it more suitable for coastal facilities and seawater heat exchangers.
Alkaline environment
Both can resist strong alkali corrosion such as sodium hydroxide, but the nickel-chromium synergistic effect of 310S makes it more stable in high-temperature alkali solutions, such as paper industry cooking equipment.
Suggestions for purchasing 310 stainless steel pipes
Clear environmental conditions: Prioritize testing the medium composition, temperature and pressure to avoid equipment failure due to carbide precipitation or pitting.
Welding requirements: If frequent welding is required (such as heat exchanger tube bundles), choose 310S to reduce the risk of post-weld intergranular corrosion.
Cost considerations: The price of 310S is about 10-15% higher than 310, but the long-term maintenance cost is lower, which is suitable for key equipment investment.
Send Inquiry






