Industry

A practical procedure for TIG welding SUS316 stainless steel: current, travel speed, tungsten size, shielding gas and filler selection by thickness, p

SUS316 stainless steel performs well in most common chloride ion environments (normal temperature, medium and low concentrations) and is a very cost-e

The choice between 304 and SUS316 is essentially a balance between short-term costs and long-term risks. In ordinary environments, 304 stainless steel

ASTM A312/A312M-24b specifies seamless, welded and heavily cold worked austenitic stainless steel pipe for high-temperature and corrosive service. It

ASTM A213 is the authoritative standard for seamless ferrite and austenitic alloy steel boiler, superheater and heat exchanger tubes developed by the

This reference article summarizes Type 347 stainless steel in data-sheet form, covering its chemical composition, annealed mechanical properties, serv

321 stainless steel stabilizes carbon through titanium, which solves the intergranular corrosion problem that is easy to occur during welding of 304 s

316 stainless steel is a molybdenum-alloyed austenitic stainless steel. Due to the addition of 2-3% molybdenum (Mo), its corrosion resistance, high te

309 and 309S resist oxidation at 650-980 C for furnace components and heat treatment equipment.

304 stainless steel is the most common and widely used type of austenitic stainless steel. It is also called 18-8 stainless steel because it contains

1.4845, designated X8CrNi25-21 in EN 10088-1 and EN 10095, corresponds to ASTM A240 310S and UNS S31008. Its density is approximately 7.9 g/cm³, with

1.4841, also known as AISI 310, is an austenitic stainless steel known for its excellent high temperature strength and resistance to nitriding. This m