super duplex 1.4410 equivalent material

Jul 24, 2025

Leave a message

If you're sourcing super duplex stainless steel for highly corrosive or high-pressure environments, EN 1.4410 is a top-tier option. But many buyers ask:
What is the ASTM equivalent of 1.4410? And what is its chemical composition?This article will answer these key procurement questions while highlighting why GNEE is a reliable supplier for 1.4410-grade products.

 

Keywords:Super duplex 1.4410 equivalent, 1.4410 vs S32750, ASTM A240 S32750, 1.4410 chemical composition, super duplex stainless steel pipe, EN 1.4410 vs ASTM standards, UNS S32750 mechanical properties,Performance of super duplex 1.4410

 

What is 1.4410 Material?

1.4410 is the European (EN) designation for a super duplex stainless steel, also known as UNS S32750, F53, and 2507. is a Super Duplex Stainless Steel with excellent corrosion resistance, especially against chloride-induced stress corrosion cracking, pitting, and crevice corrosion. It combines the strength of ferritic steels with the corrosion resistance of austenitic grades.

This material is widely used in:Offshore oil & gas platforms,Chemical processing plants,Heat exchangers,Desalination systems,Pressure vessels and piping in aggressive media.

What is the ASTM Equivalent of 1.4410?

The DIN EN material number 1.4410 is equivalent to UNS S32750 and ASTM A182 F53.

EU
EN
USA
-
France
AFNOR
Sweden
SS
X2CrNiMoN25-7-4
S32750
Z3CND25-06Az
2328

EN 1.4410 vs ASTM standards

Standard Grade
ASTM A240 UNS S32750 plate, sheet, strip
ASTM A790 UNS S32750 welded/smls pipe
ASTM A928 UNS S32750 welded pipe
ASTM A182 UNS S32750 forged fittings/flanges
ASTM A479 UNS S32750 bars/rods for pressure vessels

 

1.4410 / S32750 Chemical Composition (Typical, %)

C

Si

Mn

P

S

Cr

Mo

Ni

N

Others

0.030 max

0.80 max

1.20 max

0.035 max

0.020 max

24.0 - 26.0

3.0 - 5.0

6.0 -8.0

0.24 - 0.35

0.50 max

Mechnaical Properties Of Super Duplex 2507 (UNS S32750) 

Density 0.28 lb/in3
Tensile Strength Mpa – 795
Yield Strength (0.2%Offset) Mpa – 550
Elongation 15 %

Performance of super duplex 1.4410

 

Corrosion Resistance
1.4410 stainless steel (Super Duplex S32750) offers outstanding corrosion resistance, especially in chloride-rich and aggressive environments. With a high chromium (24–26%), molybdenum (3–5%), and nitrogen (0.24–0.35%) content, it achieves a PREN (Pitting Resistance Equivalent Number) above 40, making it highly resistant to pitting, crevice corrosion, and stress corrosion cracking. It is widely used in offshore, marine, chemical, and desalination applications where 316L or even 904L would fail.

 

Weldability
1.4410 stainless steel demonstrates good weldability with proper procedure control. It can be welded using standard techniques such as GTAW, SMAW, and SAW, but heat input and interpass temperature must be controlled to avoid intermetallic phase formation. Post-weld heat treatment is generally not required, and filler metals like ER2594 are recommended to maintain corrosion resistance and mechanical strength across the weld zone.

 

High Temperature Resistance
While 1.4410 stainless steel is not specifically designed for high-temperature applications, it retains good mechanical strength up to ~300–315°C (572–600°F). Prolonged exposure above this range may lead to phase instability or reduced toughness.

GNEE Offers S32750 / 1.4410 Products in:

pecification Of Super Duplex 2507 (UNS S32750) Strips, Sheet & Plate

Sheet/Plate Round Bar/Wire Pipe & Tube Fittings
ASTM A 240, ASME SA 240 ASTM A 276 / 479 , ASME SA 276 / 479 ASTM A 789 / 790, ASME SA 789 / 790 ASTM A 815, ASME SA 815

Customized sizes, third-party inspection (e.g., SGS, BV), and full traceability certificates (EN 10204 3.1) are available.

✅ Direct mill pricing with strict quality control

✅ Short lead times for global orders (including EU, Middle East, Asia)

✅ Inventory of S32750 pipes, plates, and fittings in common sizes

✅ Support for custom fabrication and urgent project needs

Contact now

 

Send Inquiry